ExHempKnight

Gift Premium Subscription To ExHempKnight

Join Date:

10-01-2010

Last Activity:

08-19-2014 7:47 AM

2 Likes on 2 Posts 

    ABOUT ME

  • Roanoke
  • Single

LATEST ACTIVITY

  • Posted in thread: Beer line tests & solution to the "plastic" taste on 10-05-2011 at 11:14 PM
    Further update on the Tygon Silver: Disconnected beer lines a month ago, and unplugged keezer
    (went on vacation... didn't want drunk neighbor pilfering beer). Keezer plugged back in a cold
    a week late...

  • Posted in thread: Beer line tests & solution to the "plastic" taste on 08-01-2011 at 09:42 PM
    Yes, I use Tygon Silver. No oxidized-beer taste I can detect.

  • Posted in thread: Beer line tests & solution to the "plastic" taste on 08-01-2011 at 07:33 PM
    Well, according to the calculator I found HERE, I'd say 4-6 feet (I'd go closer to 6', due to
    the lower internal friction of the Tygon)... It seems people have good luck with the
    calculations in that ...

  • Posted in thread: Beer line tests & solution to the "plastic" taste on 08-01-2011 at 06:21 PM
    I'd like proof for your claim that thin-walled tubing causes oxidation. The Tygon Silver
    3/16"ID tubing has been great so far... No discernible plastic (or any other off-) taste at
    all. The only downs...

  • Posted in thread: Beer line tests & solution to the "plastic" taste on 07-24-2011 at 02:17 AM
    It's been 3 weeks, any update on this?Well, it's been several months, but I've finally got my
    keezer up and running. So far, with 12.5 feet of 3/16" Tygon Silver tubing, I have not noticed
    any off fla...

  • Posted in thread: Residual water in brew cart lines on 07-24-2011 at 02:06 AM
    As much as I tried to design the plumbing on my new brew cart to fully drain, there are the
    inevitable lines that don't. After wet testing, I can see that after a brew/CIP/rinse cycle,
    some water will...

  • Posted in thread: Show us your Kegerator on 07-24-2011 at 01:54 AM
    What are you using for your temperature read out?A Love temp controller. I mounted it in the
    plastic grate that covers the compressor on the bottom left side. I wanted it accessible, but
    more or less ...

  • Posted in thread: Logo Thread on 07-23-2011 at 01:12 AM
    https://lh4.googleusercontent.com/-YpV15F7KIRw/TioaLm_L4PI/AAAAAAAAADc/bqhnGOPwx18/w396-h500-k/
    271984_1864599613976_1210577667_1546490_4187605_o.jpg

  • Posted in thread: Show us your Kegerator on 07-21-2011 at 02:32 AM
    I just completed my keezer. I took inspiration from here, though I came up with a different
    means of attaching the drip tray.The
    keezer:https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/285782_2296...

  • Posted in thread: My brew rig: The Omnibrew on 06-19-2011 at 11:03 PM
    UPDATE!I finally got around to doing some more work on my rig. First, a mockup of the general
    component
    layout:https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/198916_1955159957983_1212233519_323
    9...

Following Stats
FORUM SIGNATURE
Patched Kettle Brewery "Drilling more holes than we need to, since 2010."
0 COMMENTS
POST A COMMENT