Exayu

LATEST ACTIVITY

• Posted in thread: Elements turned black on 12-28-2012 at 09:32 PM
  The rating of the elements are 250V 4500W. I'm not sure what the material is made from. But it
  was a silver then when I turned on power it slowly started turing black.

• Posted in thread: Elements turned black on 12-15-2012 at 08:51 PM
  Hey all I have a question about the heating elements turning black. I did a test run of just
  water and the element and everything turned out fine. However I noticed that the element turned
  black. Is t...

• Posted in thread: 30A plug to 50A receptacle on 08-30-2012 at 05:56 PM
  I am building a eHERMS and need to demostrate it at school. The problem is that they only have
  NEMA 6-50R receptacles and I have a NEMA 14-30R plug that has the GFCI inline with the cord. So
  I have to...

• Posted in thread: Mypin TA4 user manual on 08-03-2012 at 12:36 PM
  Does anyone have a link or copy of the Mypin TA4 user manual. I lost mine and I don't remember
  how to change the settings :confused:. I can't find it anywhere on the web.

• Posted in thread: What type of Plug? on 07-27-2012 at 02:10 PM
  Cool thanks for the info. The electrician at our company had some spare 30A locking plugs :)
  Now its time for some switches I was wondering if these will work

• Posted in thread: What type of Plug? on 07-24-2012 at 04:01 PM
  I am looking to build a build an electric brewery. I am slowly progressing with my build. I was
  wondering if it would be alright to have a 20A plug and with outlet from the control box to
  elements. Th...

• Posted in thread: Accidently used condiut hole punch on 07-18-2012 at 05:15 PM
  I have a five gallon igloo cooler that I cut out the bottom for the element. Problem is that I
  used 1 1/4" condiut punch. I'm wondering if there is any way to fix this or to use a new
  container.

• Posted in thread: I accidently punched way too big of a hole... on 07-18-2012 at 05:03 PM
  I did the exact same thing for my HLT. Though I am using a 5 gallon cooler. Any sugestions on
  how to fix that?