Last Activity:01-06-2015 1:11 AM
Likes Given: 5
Posted in thread: Which Coleman 70 QT for mash tun on 01-01-2015 at 09:01 AM
I just received the marine version of #2 from Amazon today (I think the only difference with
the marine is color and the addition of metal hinges). I haven't used it yet, but based on just
looking at ...
Posted in thread: The SsBrewingTechnologies "Happy HolidaySs" Giveaway! on 11-16-2014 at 09:47 PM
Excellent. Thanks SsBrewing!
Posted in thread: ElectricBrewingSupply 30A BCS Control Panel Giveaway! on 10-18-2014 at 09:44 PM
Sweet! Great giveaway!
Posted in thread: SS Brewing Technologies "That's a ton of Stuff!" Giveaway on 09-30-2014 at 05:58 AM
Excellent! I'm in!
Posted in thread: Outlet for stir plate in chest freezer on 07-16-2014 at 05:39 AM
I did this to my upright freezer, and I believe many others have as well (got the idea here on
the forums). I used a two-stage controller (love tss2) and wired the heat switched output to
one outlet (...
Posted in thread: Kegconnection Complete Starter Kit and More Giveaway! on 07-16-2014 at 05:25 AM
Posted in thread: First brewday back. Gear failure on 07-12-2014 at 10:20 PM
As long as you maintained sanitization, you should be fine. I assume you are worried about the
"floating chunks", but many people drain the entire BK into the fermenter without major ill
effects, and ...
Posted in thread: Bowie Bottler - What o-rings? on 06-29-2014 at 11:30 PM
Just dug out my instructions and found the following:Smaller O-ring: #47 Danco = #9 from
McMaster CarrLarger O-ring: #5 Danco = #10 from McMaster CarrGood Luck!Edit: Also found in the
Posted in thread: The Great Hydra Giveaway! on 05-14-2014 at 05:18 AM
Sweet! I'm in!
Posted in thread: Help Please!!!!! on 03-28-2014 at 03:17 AM
Have you tried filling the keg with hot water and PWB or oxyclean, then pressurizing and
emptying through the beer line and tap? That's what I would try first, but perhaps you have
already. . .