Last Activity:09-09-2014 3:39 PM
1 Likes on 1 Posts
Posted in thread: Kegerator Conversion with Danby DAR440BL? on 09-24-2012 at 02:37 PM
You know, now that you mention it, I am not sure that I ever looked for screws on the second
unit because I had already decided I was just going to cut out the shelves. I had tried a
dremel, but found...
Posted in thread: Kegerator Conversion with Danby DAR440BL? on 09-17-2012 at 07:08 PM
Well, I have now bought two of these because I accidentally punctures the cooling lines trying
to clear up an Ice-Jam.The first time, I removed the screws holdign the gasket on (you had to
look uner a...
Posted in thread: The cure for your short hose troubles on 05-07-2012 at 07:38 PM
Thanks bud. I did know that acklands was here, but they do not carry part# 98623 and I was
uncertain if #98454 would work.
Posted in thread: The cure for your short hose troubles on 05-02-2012 at 12:46 AM
I'll pay up front of course!
Posted in thread: The cure for your short hose troubles on 05-01-2012 at 06:07 PM
Neither Grainger nor McMaster ship to Canada. Any HBT'er out there wanna order me some and I'll
paypal you for the cost and postage up to Canada?
Posted in thread: Propane problem on 04-30-2012 at 09:28 PM
Bbarr, mine does the same thing. If I play with the regulator, I can get the flame back up for
a minute or two. I can also gently shake the tank and get it going for another minute or two,
Posted in thread: Propane problem on 04-30-2012 at 05:13 PM
I have to use two propane tanks because one will generally freeze up over the course of a brew
day (I do back to back brew days). When one of the tanks freezes up, gas essentially ceases to
flow. I ju...
Posted in thread: Plate Chiller or new immersion on 04-26-2012 at 05:18 AM
I do 11 Gallon batches. I find after about 80 degrees, my chill rate slows down dramatically.
The last ten degrees takes as long as the first 40!
Posted in thread: Plate Chiller or new immersion on 04-26-2012 at 03:35 AM
You guys mus whirlpool constantly. I have a 50' 3/8's chiller and it takes me 20-25 mins to
cool to pitching temps when the water from the tap is 40 degrees. Much longer in the summer
when it hits 55+
Posted in thread: How do you lift your carboy out of your chest freezer? on 04-23-2012 at 07:27 PM
Really really old thread, but do those carboy hoods fit on a better bottle?