eric_xt

LATEST ACTIVITY

• Posted in thread: 2013's How many gal of homebrew in 2013 on 05-05-2013 at 12:12 AM
  21,812 + 5.5 gallons of Red Chair NWPA clone = 21,817.5+ 5 gal B3 Stout21,822.5

• Posted in thread: Guess who is finally kegging?! on 04-27-2013 at 12:38 AM
  Why can't you have front taps through the door with the 440?I did a single tap on the front.
  Putting two on the door is tough because of dealing with the shanks and the tubing when there
  are two kegs ...

• Posted in thread: 2013's How many gal of homebrew in 2013 on 04-27-2013 at 12:22 AM
  +5G American Wheat21,060

• Posted in thread: 2013's How many gal of homebrew in 2013 on 04-21-2013 at 12:51 AM
  6 gal American Amber =20,232.2520,232.25 + 5 gal British IPA = 20,237.25

• Posted in thread: My Simple Kegerator Build on 08-01-2012 at 09:55 AM
  Nice job!

• Posted in thread: Kid Friendly, pretend homebrew kit on 07-13-2012 at 11:52 PM
  Why not have him make cider. He would need to "mash" the apples and if you got a Soda Stream he
  could even carbonate it.That's a good idea. My 3 yr old calls apple juice his beer. Instead of
  the soda ...

• Posted in thread: shank hole size too big? on 07-09-2012 at 10:59 PM
  I'm going to install my faucets this week and have a hole saw kit that starts at 1 1/4". is
  this too big for the shank hole? the shank itself is 3/4" OD (Krome stainless). ORI have spade
  bits at 3/4 a...

• Posted in thread: Kegerator Conversion with Danby DAR440BL? on 07-07-2012 at 05:12 PM
  I have exactly the same question!I did on tap through the door. Definitely room to do 2 if I
  wanted, but might need to move them a bit higher. shank size I used was, I believe, 4 1/8".

• Posted in thread: My Simple Kegerator Build on 07-04-2012 at 09:26 PM
  Two kegs and a CO2 tank. I have a T on the regulator so I can carb the second while the first
  is on the tap.They are Ball Lock kegs (Pepsi) and the CO2 is a 5# tank that sits on the hump.
  There are ot...

• Posted in thread: My Simple Kegerator Build on 07-04-2012 at 08:29 PM
  I justed wanted to say thanks to all who shared their kegerator builds on here. I've been
  lurking for the last month and just today completed my kegerator build from a Danby mini-fridge
  (4.4 cf model)...