- Posts 6
Last Activity:01-09-2015 10:23 PM
Posted in thread: Dropped my cell phone into Boiling Wort on 01-13-2010 at 02:22 AM
My guess would be that your beer is fine... you have to try pretty hard to mess it up. Your
cell phone, on the other hand, is probably a different story.
Posted in thread: Gotta Be A Better Way of Getting DME Into a Flask... on 09-09-2009 at 09:37 PM
I just use a piece of scrap paper to make a funnel. The DME just slides right down, and any
little bit that sticks to the paper just gets thrown away. I figure that I'm going to boil it
anyways, so it...
Posted in thread: Rusty Element on 08-04-2009 at 03:29 AM
Given the right conditions, 400 series stainless will rust. It can also be slightly magnetic
too.You might want to see if you can check the material of the pieces, and change to 300 series
Posted in thread: drill pump on 06-12-2009 at 01:31 AM
Make sure that you have the suction and discharge of the pump correct for your application, in
addition to the rotational direction of the drill. I've used them a bunch for pumping SAE 46
oil at work,...
Posted in thread: Stir Plate - Can't get the fan to move...at all on 05-16-2009 at 03:20 AM
Just to check... you tried swapping the polariy/leads of the power supply going to the fan,
right? It's DC...-Eddie
Posted in thread: How much time on stirplate? on 05-01-2009 at 09:08 PM
I've had pretty good luck with about 36 hours on the stirplate. I make it two nights before I'm
going to brew, and let it stir away for a day and a half. Then I take it off the plate and put
it in the...