Last Activity:12-19-2014 6:57 PM
Likes Given: 3
12 Likes on 9 Posts
Posted in thread: Electric brewing basement exhaust shared with radon pipe on 09-03-2014 at 09:11 PM
Hmmm. Interesting idea. Only thing I would make sure of is that the fans are rated for wet
location. If you find that radon mitigation is actually a real thing let us know.
Posted in thread: Touch Panel/PLC Control (moved) on 08-21-2014 at 05:44 PM
Ahh. My bad. 1 second time base. I get it now. Thanks. Question: would it be any more involved
to use a C0-04RTD module rather than the thermocouple module? Admittedly, I know just enough to
be very d...
Posted in thread: Touch Panel/PLC Control (moved) on 08-20-2014 at 02:25 AM
The time base system works like this, say the time base is 1000ms. At 50% output the heater
turns on 500ms, off 500ms. 75% power, on 750ms, off 250ms. Is that the actual time base (I
would call it dut...
Posted in thread: Sourcing new American oak barrel on 07-22-2014 at 01:44 AM
What size barrel are you looking for? New or single use (the latter I would guess)
Posted in thread: STC 1000 Temperature Server on 07-06-2014 at 04:44 PM
What about just using a DS18B20 to get the temperature? There's really no secret sauce in a
STC1000 that you couldnt do in sketch.
Posted in thread: 1/2 ID x 5/8 OD silicone tubing on 07-02-2014 at 05:21 PM
This is the stuff: guess it would about $20 to ship.
Posted in thread: 1/2 ID x 5/8 OD silicone tubing on 06-30-2014 at 09:21 PM
New / never been used. Mistakenly purchased 5/8" OD silicone tubing from US Plastics. This
works fine for gravity but not for pumping. $70 + shipping for 100'
Posted in thread: Can you leave elements submerged overnight? on 06-05-2014 at 12:52 AM
No. Consider that water heater elements sit in water for years on end. You need to check for
leaks that could be shorting to ground.
Posted in thread: Mill Reverse Wiring Problems on 05-02-2014 at 10:55 AM
BTW, I have a similar diagram for 3PDT use.Could you share that here?
Posted in thread: Mill Reverse Wiring Problems on 04-30-2014 at 10:20 PM
is the one you use?