Last Activity:11-12-2015 3:51 PM
Posted in thread: Todd's Muscadine Wine on 08-29-2015 at 10:50 AM
I found this old thread, and I'm using this recipe to make some muscadine wine. Since this is
my first wine I'm checking to make sure I understand. Why am I pulling off the yeast cake
before I'm addin...
Posted in thread: Inkbird itc-308? $35 gets you wired, 2 stage temp controller. on 08-12-2015 at 09:36 PM
I've been using it to control a minifridge at various temperatures for a while now and I
couldn't be happier. It is so easy to use, and keeps the temp within +/- 1°F once you adjust
the settings.I do ...
Posted in thread: Growing hops in Mississippi. on 04-24-2014 at 01:19 PM
Mine popped up and stalled. They aren't in the best location. I think it's a combo of too much
shade, and the cool nights we've had. I plan on moving them eventually, just too much going on
this year ...
Posted in thread: Growing hops in Mississippi. on 03-19-2014 at 07:17 PM
My cascades are starting to peep through. Hope I get something out of them this year (year 2).
Posted in thread: clean, crisp, clear beer on 03-17-2014 at 08:22 PM
The hefe has a low flocculent yeast. It is supposed to be hazy. The wheat is supposed to be
hazy as well. The IPA could be hazy from the dry hopping.The only one I see you've brewed that
I would be co...
Posted in thread: poppet making beer flat? on 03-15-2014 at 11:03 PM
Okay swapped popetts and dip tube with a spare keg. Didn't help. I got no other ideas... only
thing that went wrong with this beer is my thermostat failed while I was out of town and froze
the beer, b...
Posted in thread: poppet making beer flat? on 03-14-2014 at 08:38 PM
I wonder if you could get gunk in the diptube not enough to block flow but enough to knock CO2
out of solution and not see it in the line. I wondered the same thing. I have a 2 year old and
a 4 year o...
Posted in thread: poppet making beer flat? on 03-13-2014 at 11:20 PM
No both are open. Plus the beer inside is carbonated.
Posted in thread: poppet making beer flat? on 03-13-2014 at 03:14 PM
When you say flat are you talking about lack of head, or lack of CO2 in solution. I've had
beers that were fully carbed, but had no head to speak of. I could still see a lot of bubbles
coming out of s...
Posted in thread: poppet making beer flat? on 03-13-2014 at 01:52 PM
Okay. Need advice. I have a beer that I know is carbed, and I know is not overcarbed, but it's
coming out flat. No head, just flat.I have two kegs currently in my keezer attached to the same
gas line ...