Last Activity:01-21-2014 4:58 PM
2 Likes on 2 Posts
Posted in thread: Vintage GE Kegerator on 01-03-2014 at 12:59 PM
Standard Drill bits for the pilot holes. I went and bought a pack of two step bits for the
larger holes. I believe they cost $12 at Harbor Freight. If I remember correctly there is an X
brace in there...
Posted in thread: Vintage GE Kegerator on 01-02-2014 at 12:54 PM
I took a regular bit drilled through both the inner and outer together. Then took a step bit
and drilled them separately. I did take it apart first to ensure I wasn't going to hit one of
the braces in...
Posted in thread: Vintage GE Kegerator on 04-19-2013 at 07:01 PM
I looked at all the threads with custom paint and decided to keep it original and vintage.
Picked up the fridge on CL for $125, the taps with pulls and stems on ebay for $20 and couldn't
be happier wi...
Posted in thread: Maiden Voyage of my 3 Tier Stand on 03-07-2013 at 04:49 PM
No issues with condensation. Prior to this I didn't know how to weld either. Thru trial and
error and several hours of grinding I ended up with something I can be proud of. Search for the
ladder brew ...
Posted in thread: Maiden Voyage of my 3 Tier Stand on 02-25-2013 at 09:49 PM
Southport area, parents still live there, I fled for warmer climates as soon as I could.
Posted in thread: Maiden Voyage of my 3 Tier Stand on 02-25-2013 at 06:28 PM
My original blueprint (the one in my head) had the valve about 6 inches above the base of the
MT. Functionally that is a better position. I moved it down to allow the pipe to flush mount to
Posted in thread: Maiden Voyage of my 3 Tier Stand on 02-25-2013 at 04:56 PM
The frame is 14ga 2" square steel tubing. It's all cut out of one 24' piece. I think it cost
$25 and the local metal yard. I noticed you have the Solider's & Sailor's Monument for an
avatar. I grew up...
Posted in thread: Maiden Voyage of my 3 Tier Stand on 02-25-2013 at 02:08 PM
This is my version of the simple 3 tier stand. 8 gallon HLT, 10 Gallon MT cooler, 11 gallon BK.
Not having to lift 170 degree water over my head....priceless. Note: plastic tubing plugs will
Posted in thread: Central Dallas Homebrew Club on 01-14-2013 at 04:18 PM
Check out They are downtown Dallas.
Posted in thread: Yet another 3 tier rig--dialup warning large pix on 12-28-2012 at 02:52 PM
I like everything about this, so much so I went out an bought a 24' length of 2" sq 14ga tube.
One question how is the heat transfer between the HLT, BK and the MT? The reason I ask is I'm