Last Activity:11-09-2015 12:09 AM
Posted in thread: Rebel Brewer Giveaway! on 11-24-2013 at 03:39 PM
Posted in thread: StainlessBrewing.com Summer Giveaway! on 07-13-2013 at 07:25 PM
Can't wait to win.:mug:
Posted in thread: 3/8" tubing with chugger pump on 12-26-2012 at 08:42 PM
I should have said this earlier. I bought a chugged pump a year ago and ran into issue with the
impeller locking up. I called the company, they told me you can not use less than .5" on the
Posted in thread: 3/8" tubing with chugger pump on 12-24-2012 at 07:20 PM
+1 on 1/2 ", but it really only matters on the suction side. You don't want to starve the pump
or run the pump dry.
Posted in thread: Propane plumbing help on 12-24-2012 at 12:55 AM
I just want to start out by saying I'm no expert. For your questions about the regulator: it
depends on the btu rating and pressure design of your burners. Are you using low pressure or
high pressure ...
Posted in thread: all grain setup w/ kegs and kegerator- Western PA on 10-29-2012 at 11:58 PM
Your price is good but I only really need the corny kegs. If your willing to split them what is
Posted in thread: 3-Way Ball Valves? on 03-14-2012 at 12:29 PM
No, two ports are always open.
Posted in thread: WTB: Simcoe hops on 03-13-2012 at 10:46 AM
Thanks for the replies. I was able to find some by the pound.
Posted in thread: WTB: Simcoe hops on 03-11-2012 at 05:56 AM
I can not find these in my area right now and plan on making double IPA using Simcoe. I am
interested in a pound or more sore if someone out there is willing to tap into there reserves I
Posted in thread: Need help troubleshooting 2 problems with new Brewtus 10 on 02-24-2012 at 12:19 PM
I have a very similar setup. Using the proper size orifice will give you the proper air
mixture. Search for low pressure propane to explain the difference in the pressures. Also you
should be able to ...