Gift Premium Subscription To dukesbb37

Join Date:


Last Activity:

01-26-2015 5:18 PM

1 Likes on 1 Posts 


  • Single
  • Durham
  • NC


  • Posted in thread: 1-Gallon Brewers UNITE! on 01-23-2015 at 12:29 AM
    For those of you who use a mash tun in your 1 gallon brews... do you sparge? I have a 5 gallon
    mash tun, and usually stary my boils with 1.75G of wort. If i put less than a gallon in my mash
    tun (2 pa...

  • Posted in thread: carlos rossi bottles on 12-13-2014 at 04:49 AM
    Hi folks,I have been brewing 3 gallon extract batches in a 5 gallon brewpot, and I dont think
    it will be big enough for BIAB, so ive been looking at some other ideas with small-batch
    beers.For those o...

  • Posted in thread: thermometer placement on 11-29-2014 at 05:39 PM
    So... made a dumb mistake. I just eyeballed my thermometer placement on my kettle and when i
    tested the water levels, the probe of the thermometer sits about half an inch above the water
    level (after ...

  • Posted in thread: Jockey box question on 11-24-2014 at 08:44 PM
    thanks for everyone's help. I went with a 6 pass cold plate, and i'm going to use jumpers to
    pass two faucets through the plate 3 times each. I've read that most cold paltes are abotu 20ft

  • Posted in thread: Jockey box question on 11-24-2014 at 04:49 PM
    Awesome. I am a little confused on one thing tho. What would be the difference between buying a
    6 pass cold plate, and triple passing it, vs. these people who are using 120' coils.If there's
    20ft per ...

  • Posted in thread: Jockey box question on 11-21-2014 at 08:12 PM
    I know this is subjective... and I hate to be that guy but how bad are we talking? Miserably
    foamy or just need to pour with care?I only ask because i have to pull the trigger fast on
    buying the cold ...

  • Posted in thread: Jockey box question on 11-21-2014 at 07:35 PM
    I know this isn't a kegerator.. but its the closest of all the categories.Here's my thoughts. I
    am going to build a jockey box using a cold plate, and it has two inlets and two outlets. I
    have heard t...

  • Posted in thread: Kegconnection on 09-13-2012 at 06:43 PM
    So i ordered a 3-tap complete kit from kegconnection. Everything came super-quick, and it was
    definitely the best price i found. Hooked everything up, and we could hear (fairly loud) a leak
    coming out...

  • Posted in thread: Kegconnection Giveaway! on 09-13-2012 at 06:03 PM
    I'm in! Crossing my fingers...

  • Posted in thread: Another sodastream thread on 09-09-2012 at 02:07 AM
    So ive been searching and reading a lot about people thinking about trying to use a sodastream
    machine to make beer. But very little on replacing the sodastream with a keg...If you boiled
    water, kegge...


Newest Threads