VIEW MY

drwoods21

Gift Premium Subscription To drwoods21

Join Date:

08-06-2012

Last Activity:

03-13-2015 3:31 PM

Likes Given: 1

    ABOUT ME

  • Male
  • Married

LATEST ACTIVITY

  • Posted in thread: Testing new Control Panel on 09-20-2014 at 05:49 PM
    I figured out the issue. Everything was wired correctly. It seems the adjustable DC power
    supply was to close the the back plate or the screws I was using was touching the back of the
    box through the ...

  • Posted in thread: Testing new Control Panel on 09-17-2014 at 03:09 AM
    Attached are some pics of the inside of the panel. One thing to note, I am assuming I don't
    need the fuses in place for the heating element plugs in order to test. Please let me know if I
    am wrong on ...

  • Posted in thread: Testing new Control Panel on 09-17-2014 at 02:39 AM
    My contactors don't have the option of turning them off. I have a multimeter but not to
    electrical savvy enough to know how to test without power applied. What is the best way to do
    this?

  • Posted in thread: Testing new Control Panel on 09-17-2014 at 02:21 AM
    Kal, I created a wire like what is shown in your picture to test. Plugged into a normal garage
    outlet that is a GFCI plug. When I turned the key on the box, the power light and meters
    flashed I heard ...

  • Posted in thread: Testing new Control Panel on 09-15-2014 at 04:26 PM
    Thanks Kal, I will try this out. I will report back with my results. Thanks for all the hard
    work you put into your guide to build this, couldn't have done it without it.

  • Posted in thread: Testing new Control Panel on 09-14-2014 at 07:18 PM
    I completed my electric control panel awhile ago but haven't had the chance to do anything with
    it yet as I don't have a plug/breaker setup that will handle the final draw it will need.
    However, my qu...

  • Posted in thread: My Stirplate... Cheap and Easy Build... on 04-12-2014 at 06:10 AM
    I just finished my build of this. Works great! I did realize that I have to use a small stir
    bar to make sure it doesn't spin off. Doesn't help that I am using a 1 gallon jug as the
    container, doesn't...

  • Posted in thread: High Alkalinity and High PH on 11-06-2012 at 01:23 AM
    Yeah these numbers are the average. The report doesnt give me chloride or sulfate levels.
    However it gives me the following in addition to the numbers I already posted.Arsenic
    0.431Barium 0.047Beta/ph...

  • Posted in thread: High Alkalinity and High PH on 11-05-2012 at 05:39 AM
    I just reviewed my local water quality report and realized that I am dealing with a high
    alkaline level and high ph of my water. I have noticed that most of my brews always have some
    sort of weird fla...

  • Posted in thread: Hydrometer question on 11-02-2012 at 02:46 AM
    Bill,If you are just getting started brewing you would be fine getting Northern Brewers basic
    hydrometer here: If you plan on getting involved in the hobby, which I am sure you will once
    you have br...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS