Last Activity:04-11-2015 11:42 AM
Age:63 years old
Likes Given: 18
2 Likes on 2 Posts
Posted in thread: Priming sugar for yeast starter? on 08-29-2014 at 11:55 AM
recycle you.... I looked for a thread but obviously didn't find it.:)
Posted in thread: Priming sugar for yeast starter? on 08-29-2014 at 11:32 AM
I have a small amount of priming sugar that I never used because I keg my beer. Can I use it
for the yeast in a starter?:drunk:
Posted in thread: Hello from NC! on 07-28-2014 at 12:45 PM
Welcome from SE Tennessee. Not too far from ya. I just got back into brewing myself.
Posted in thread: Greetings from NC! on 07-28-2014 at 12:42 PM
Welcome from SE Tennessee
Posted in thread: Rubber Gasket on Regulator stem on 07-23-2014 at 04:24 PM
I did the same last weekend. I used keg lube around the gasket and carefully pushed it as far
into the grove as I could then screwed the regulator back on. Seems to work just fine. Good
luck!Not sure ...
Posted in thread: Rubber Gasket on Regulator stem on 07-23-2014 at 03:43 PM
I have a problem. I thought I might be having a leak where the regulator stem attaches to the
CO2 bottle. At the very end of the stem is a rubber gasket. I pulled it out and was going to
replace it. H...
Posted in thread: Growler Longevity on 07-22-2014 at 11:04 AM
Thanks to everyone for their responses. I filled from my own kegerator. I guess I'll figure it
out. I filled two growlers so I would have an empty keg for my next fill that's in the
secondary now. I'm...
Posted in thread: Growler Longevity on 07-21-2014 at 06:23 PM
Probably been asked but, how long will freshly filled growler last in the fridge as long as you
don't crack it and pull a glass off it?... If you don't get any loss of carbonation it should
be good fo...
Posted in thread: Chattanooga on 07-21-2014 at 01:34 PM
Dayton, TN.... Just started brewing again after 20+yrs. Partial mash is as far as I've got.
Might be interested in going all the way to all grain with a little experience.
Posted in thread: Chattanooga on 07-21-2014 at 01:27 PM