- Posts 18
Last Activity:02-20-2013 7:22 PM
Posted in thread: Has anyone tried the Odell Woodcut series? on 12-25-2012 at 09:32 PM
I've had the 5 and actually have another bottle of it. It is a really good Quad but I do not
think any of the bottles in that run ended up bottle conditioned. I plan to force carb my
Posted in thread: San Antonio Brew Club? on 06-06-2012 at 04:35 AM
Bexar Brewer here. The club is actually pretty active and we have quite a range of brewers. We
held a AHA competition in April and had nearly 550 entries. We also assisted for the homebrew
event last ...
Posted in thread: In austin texas looking for good beer. on 05-30-2012 at 10:05 PM
Jester King is just outside of Austin and some of their beers are sour. Also, I recommend going
to Whip-in ( both the beer (draft and bottle shop) and the food.
Posted in thread: Any reason not to start with all grain on 04-19-2012 at 03:06 AM
I've only done all-grain and I have never regretted not starting with extract. I actually think
that all-grain makes more sense as you are not taking steps that are already completed for you
and then ...
Posted in thread: Need Help With Mill Motor on 03-22-2012 at 07:02 PM
I assume you would be looking for a motor with the following specifications:120 V (sometimes
noted as 110 V)60 in-lb (or more torque - I would go with 70 or more probably)AC motor, not
Posted in thread: Need Help With Mill Motor on 03-22-2012 at 05:50 PM
I have the MM3 2.0 and I ended up buying three motors before I got one that would work. You
will need 80 in-lb or more torque and want somewhere around 150-300 rpm. The first motor I
bought only had 4...
Posted in thread: Motor for mill - suggestions? on 03-13-2012 at 05:29 PM
I bought the following 2 Bodine motors on ebay after trying the more powerfull of the
frequently reccomended Surplus Supply motors (which they are out of now) for my MM3 2.0. That
motor (Surplus Suppl...
Posted in thread: What are Parameters for Competition Brews? on 02-29-2012 at 05:31 PM
If you are a little light on the color that would likely only cost you 1 or 2 points out of a
possible 3. Also, there is a good chance that a low ABV wouldn't be noticed.
Posted in thread: What are Parameters for Competition Brews? on 02-29-2012 at 05:12 PM
"I have a Blonde Ale that I'm quite fond of, however, it falls WAY outside of the IBU range.
According to my brew software, it lists it at 98 IBU."Sounds like an IPA to me.
Posted in thread: Brewing with Pecans on 02-28-2012 at 05:20 PM
I've done it a few times with adding the pecan meat into the mash after I had roasted them 3 or
4 times for 15 minutes at 325 dgrees. There are a number of discussions about this if you
search for Sou...
- Smoking Malt (Results and Ideas)
- Suggestions for what to brew
- What are you drinking now?
- best techniques for a West Coast style ipa
- Four Kegs One Tap
- What do you dislike about summer?
- Tutorial for Shipping Beer
- StrangeBrew Elsinore - Raspberry Pi based brewery controller
- Dual Pressure CO2 Regulator Help
- Freezing off extra volume
- Who's smoking meat this weekend?