Last Activity:12-05-2013 8:32 PM
Age:30 years old
Likes Given: 1
Posted in thread: Recirc during mash? on 10-16-2013 at 09:33 PM
I'm hoping to finalize my eBIAB stand/keggle setup this weekend and I've read a few posts where
people have problems with their bags/grain sealing off a false bottom, causing them to dry fire
Posted in thread: wilserbrewer BIAB Bags, Triple Play Value Combo on 10-15-2013 at 08:01 PM
Got my bag the other day, looks great, can't wait to use it. Wish I had ordered a hop spider
Posted in thread: Keg to ekeggle conversion pics on 07-29-2013 at 03:03 PM
Have you looked through this? try that again but I found the wall was too thick and I couldn't
get the nut to grab. I'll give that another go. Thanks!
Posted in thread: Keg to ekeggle conversion pics on 07-29-2013 at 02:41 PM
More info? leaking at threads? That may be because you may be putting a 1"NPS element into a 1"
NPT(tapered) fitting.. If so:Best answer, weld on a 1.5" or 2" ferrule and use an element
adapter that h...
Posted in thread: Keg to ekeggle conversion pics on 07-29-2013 at 02:23 PM
I can't seem to get my element to seal very well, anyone have some recommendations?
Posted in thread: Kal Clone and New Brewshed on 07-02-2013 at 05:57 PM
How'd you drill the holes for the plugs on the bottom? I used my dremel for the wall-source
hole and that was a complete PITA compared to using a step-bit for the LED holes.
Posted in thread: PID Question on 06-28-2013 at 06:51 AM
This is the diagram I have - no LED's because my switches are the push-button
Posted in thread: PID Question on 06-28-2013 at 05:32 AM
I could be wrong but i think you should base it on amps? If your running a 110v the 2352 should
do it as its rated to 25amps (I think). If your running 220v the 2362 is the way to go as its
40amps. I ...
Posted in thread: PID Question on 06-28-2013 at 04:41 AM
Ordered my supplies from eBrewSupply for my control box and ordered my PID/Timer from Auber
separately - ordered a 2352 instead of a 2362. I plan on only having 1 5500w element - do I
need to return t...
Posted in thread: eKeggle BIAB - Pump Re-circulation on 06-19-2013 at 04:48 PM
I'm trying to plan out my eKeggle ports, and I'm wondering about re-circulation during mash. I
assume that I should be directing any flow through my lid and on top of the mash - a dispersion