Last Activity:07-22-2013 6:10 PM
1 Likes on 1 Posts
Posted in thread: Hop debris in Keg, would gelatin help? on 07-23-2013 at 01:38 AM
Interested in hearing others suggestions. I use a mesh bag over my racking cane /auto siphon
when transfering. It works really well on filtering out the hop debris.I put my hops in a large
Posted in thread: Hop debris in Keg, would gelatin help? on 07-23-2013 at 01:29 AM
You could rack it into another keg and leave the last inch or two, that would probably get rid
of most of the hop particles.
Posted in thread: CO2 regulator leaking on 07-22-2013 at 08:50 PM
I have an old CO2 tank (1989 marked on the tank) with an old regulator in my kegging setup. I
noticed that it's leaking out of the regulator. There is a hole drilled in the part that holds
the screw y...
Posted in thread: Fishing reel tap handle too heavy? on 06-29-2013 at 07:56 PM
Yeah, I thought about tilting it back but that probably would be difficult to assemble and
would get in the way since i'm using the freezer/collar approach. I wonder, though, if just
using the right t...
Posted in thread: Fishing reel tap handle too heavy? on 06-29-2013 at 06:27 PM
I'm going to be building my freezer/kegerator in the near future and I had an idea for a tap
handle. I have a really old trolling rod with one of those old, big saltwater reels on it (see
Posted in thread: what's the fastest you had fermentation start? on 09-30-2012 at 01:31 AM
If you get a good starter going, it'll technically be fermenting before you even pitch, and you
can see bubbles less than an hour into it sometimes.Just be careful about the temperature, in
Posted in thread: Conditioning Timing Question on 09-30-2012 at 01:29 AM
Have more kegs filled!
Posted in thread: Is a year to long on 09-30-2012 at 01:04 AM
It could have gotten an infection,but after a year you'll know one way or the other. It's
either really infected, or not at all, so smell it, then taste it, if it tastes remotely fine
it's probably go...
Posted in thread: Blow off assembly vs airlock on 09-30-2012 at 01:01 AM
no, never had that problem, but i've seen some people rig a blowoff by putting the bottom part
of a 3-piece airlock in the drilled stopper and then attaching the blowoff tube to that. Not
the best pra...
Posted in thread: Using Secondary for Variants? on 09-30-2012 at 12:56 AM
The extra space in the secondary would be a problem unless you were able to purge it with CO2
(which you could do with a keg setup, but if you're bottling I'm guessing you can't).I'd also
be weary abo...