VIEW MY

DonD13

Gift Premium Subscription To DonD13

Join Date:

01-04-2009

Last Activity:

04-27-2011 8:35 AM

    ABOUT ME

  • Male
  • Single

LATEST ACTIVITY

  • Posted in thread: Another electrical question for the experts... on 02-06-2010 at 06:36 PM
    If your spa breaker has a 240v gfci in it, it probably will support 110 as well. does the
    breaker in the spa unit have a white pigtail attached to it and the neutral bus?If so, ditch
    the 110v gfci. Th...

  • Posted in thread: Another electrical question for the experts... on 02-06-2010 at 04:22 PM
    I want to preface this by saying be very carful around electricity. I am not an electrician,
    nor do I assume any responsibility if you burn your house down or electrocute yourself. You
    need to keep th...

  • Posted in thread: Snow-globe Looking Belg. Quad in Primary on 12-02-2009 at 04:15 PM
    Revvy hit the nail on the head: leave it in there for awhile. I'd check gravity once a week or
    so, and don't worry about leaving it on the yeast for awhile. Remember, Belgain brews are
    supposed to hav...

  • Posted in thread: Belgian Raspberry Ale on 11-07-2009 at 09:21 PM
    Someone asked for this, so here goes. This is my first recipe posting, and I'm not at my
    brew-house so I don't have hard numbers handy so this is from memory, but I'll update
    later:5gal batch, full bo...

  • Posted in thread: Ahhh Explosion! on 11-02-2009 at 12:47 AM
    The first batch of our raspberry belgian did this because the seeds from the raspberrys clogged
    the airlock. Unfortunately it got infected and ruined a ~$70 batch :-( Re-brewed it, fermented
    with a bl...

  • Posted in thread: Peltier fermenter cooler using water heat exchangers on 09-25-2009 at 05:56 AM
    Check out these guys: specialize in Peltier based liquid chillers for computer cooling. I have
    one of their 'Eliminator' systems in my PC, and it runs consistently around 20 degrees F below
    ambient t...

  • Posted in thread: Botched thermothingy install on 05-12-2009 at 06:05 PM
    I did exactly the same thing when drilling my Coleman Extreme MLT for the thermothingy.
    Fortunately I need a separate 1/2" bulkhead for my sight glass anyway, so I found a fitting
    that will let me mou...

  • Posted in thread: Experience with used Bourbon Barrels? on 04-28-2009 at 05:36 AM
    I've been wanting to try brewing a bourbon stout for awhile, but my only experience was a
    spoiled batch from I'm guessing not getting the oak chips we used perfectly sanitized. Anyone
    who's using wood...

  • Posted in thread: Using a PID to control a pump in a HERMS setup? A no-no? on 04-15-2009 at 07:50 PM
    If you want to pump 2.5gal/minute through a coil and heat it in that coil from 122F to 152F, a
    30F rise... you will need... wait for it.The equivilent of 8000 WATTS of power applied directly
    to 2.5 ga...

  • Posted in thread: Using a PID to control a pump in a HERMS setup? A no-no? on 04-15-2009 at 06:46 PM
    Well, not having brewed an AG yet, but considering building a HERMS and having a decent
    understanding of thermodynamics, this thread is really interesting to me. Without any specific
    measurements (pur...

FORUM SIGNATURE
Carboy 1: Dry Cider batch 2 Carboy 2: Imperial Wit Bottled/Tap-a-draft: Dry Cider, Tripel, Fat Tire Clone, Belgian Raspberry Ale, Patersbier, Double IPA Planning: First all grain brew, new brew room, long draw 4 tap keg system/keezer
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS