VIEW MY

DM3MD157

Gift Premium Subscription To DM3MD157

Join Date:

01-23-2013

Last Activity:

01-22-2015 12:53 PM

Likes Given: 1

LATEST ACTIVITY

  • Posted in thread: how best to clean a dirty blow off tube on 12-21-2014 at 05:48 AM
    I used a keg dip tube brush (similar to the brush in the previous post) and wrapped a small
    piece of paper towel around the brush part. Pushed it through as far as the wire will go and
    pulled it out. ...

  • Posted in thread: McMaster Keg O-Ring List on 12-20-2013 at 12:47 AM
    Does anyone have a Amazon link to Buna o-ring for posts? The previous post is for silicone, not
    sure if anyone knows the Buna counterpart.

  • Posted in thread: Pipe Sealant on 12-18-2013 at 04:32 AM
    Also, I bought some fittings to put a valve in the output, the fittings screw in, but it looks
    like there may be a more gradual taper as it screws in further into the regulator body. Could
    be because ...

  • Posted in thread: Pipe Sealant on 12-18-2013 at 04:25 AM
    I didn't realize there was a direction with tape! Which way are you supposed to run it?

  • Posted in thread: Pipe Sealant on 12-18-2013 at 04:04 AM
    Unfortunately none of the home depots in my area have that. :(If I go with teflon, I'll get the
    yellow tape. Is it better to use a liquid vs tape?Or how about this stuff?

  • Posted in thread: Pipe Sealant on 12-18-2013 at 03:49 AM
    I am brand new to kegging and I just got me setup in the mail. One of the gauges was damaged,
    so the company sent me a new one. I was able to get the old one off, it looks like it was some
    sort of adh...

  • Posted in thread: CO2 supplier near Bel Air, MD on 12-15-2013 at 10:10 PM
    Fire Safe in Aberdeen will refill for $19.95. Not at all central to Harford, but may be
    convenient if you live or work near APG.Is $20 for a 5 lb tank a good price?

  • Posted in thread: How much trub is acceptable to transfer into Primary? on 09-25-2013 at 01:28 PM
    Thanks for all the responses everyone! I have always been under the impression that
    transferring trub is a no-no when going into the primary. Thus far when I have transferred the
    wort, I have left a s...

  • Posted in thread: How much trub is acceptable to transfer into Primary? on 09-25-2013 at 04:06 AM
    Anywhere from all of it to none of it. There us debate whether it makes a difference. Basic
    Brewing Radio did a nice experiment on the issue. (podcast is on basicbrewing.com). Personally,
    I try to lim...

  • Posted in thread: How much trub is acceptable to transfer into Primary? on 09-25-2013 at 03:49 AM
    I am on my 5th batch of beer now and I have a noob question that I can't seem to find the
    answer to here. When I am transferring the wort into the primary from my kettle, how much trub
    is acceptable t...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS