- Posts 15
Last Activity:08-14-2010 1:58 PM
Posted in thread: convince me to buy a barley crusher.. on 05-05-2009 at 09:36 PM
If I were to buy a new grain grinder I would get one that has the gears that drive both
rollers.PatAfter seeing your setup it would be even more of a pain to clear a slipping roller.
I just picked one...
Posted in thread: Could you (would you) brew in this room with an electric setup? on 11-22-2008 at 06:42 AM
You can also use ground fault breakers in a sub panel, vs. individual GFI outlets, especially
if your going with high amperage heating elements (25amp+).
Posted in thread: Taming the Wild Beast - Multi-Jet burner mod on 11-22-2008 at 06:26 AM
Bobby do you know the difference in orifice size on the NG vs the propane version of the
multi-jet? Just wondering if anybody has tried the propane version of this burner on NG to see
if it limits the...
Posted in thread: Electric valves on 11-22-2008 at 06:00 AM
Well that's a bummer, it is hard to come by quality transformers on the cheap. Are you
outputting 0 vdc/off during NC operation in your program? Since you would seem to be the one
with advanced knowle...
Posted in thread: Electric valves on 11-21-2008 at 09:18 PM
Kladue,Just curious are you using proportional or floating, and spring return or fail in place?
Posted in thread: What's next? on 11-17-2008 at 07:42 AM
2 months ago I sold my all grain equipment, Then, maybe 5 weeks ago the urge to brew
returned.ME?Well if you can decide and switch in such a short period I would suggest holding on
to your re-acquisit...
Posted in thread: Natural Gas Burner Suggestions on 11-17-2008 at 07:26 AM
If your multi-jet didn't work for you, and the banjo did, you are propagating an issue specific
to yourself because the multi-jet heats as well or better than a banjo. Either:A) You have
Posted in thread: high pressure Co2 lines on 11-17-2008 at 03:12 AM
Exactly, 3-way infeedThey're probably not cheap. You might be better off running a primary on
the tank and running 30psi to a secondary bank.
Posted in thread: New Diamond Plated Herms! HOTT PICS! on 11-15-2008 at 11:28 PM
Looks sweet, should make cleanup a breeze, and nice table space is definitely a plus.
Posted in thread: BCS-460 Beta Test on 11-13-2008 at 06:08 PM
Slnies,Thanks that diagram is all I needed, don't worry about the pics.