dirtymartini

Gift Premium Subscription To dirtymartini

Join Date:

12-31-2006

Last Activity:

10-09-2012 3:01 PM

    ABOUT ME

  • Northeastern PA
  • Electrician
  • Paul B Casterlin
  • AMA

LATEST ACTIVITY

  • Posted in thread: 10 Corny Kegs + bottles NEPA on 01-15-2010 at 08:08 PM
    If the deal falls through, I'm definitely interested and can pickup.Will do, I have 2 ahead of
    you right now.:mug:

  • Posted in thread: 10 Corny Kegs + bottles NEPA on 01-15-2010 at 07:38 AM
    I have 10 pin lock corny kegs I would like to get rid of....plus I'll throw in 2 or 3 cases of
    de-labled brown bottles. $50.00 for all. Pick up only in PA zip 18618

  • Posted in thread: Line Balancing Confusion on 02-03-2008 at 03:14 PM
    Lines that are too long will only make the pour take longer but it will NOT cause more foam.
    Suggesting that you shorten your lines when you have a foam problem is bad advice IMHO.As I
    mentioned, I wo...

  • Posted in thread: Line Balancing Confusion on 02-03-2008 at 12:07 PM
    No, the longer the line, the greater the pressure drop, resulting in a lower pressure at the
    faucet. Personally, I think 10 feet is a good place to start. A longer line will only result in
    a longer po...

  • Posted in thread: Line Balancing Confusion on 02-03-2008 at 03:49 AM
    I think the line length is too long and the pressure is too high. If you dont have separate
    regulators for each beer, I would use 7psi with about 2 feet of line at 38F (depending on a few
    other variab...

  • Posted in thread: Beer Line Length and Pressure Calculator on 02-03-2008 at 03:44 AM
    Just finished this one. It uses a few formulas found on the Internet to calculate the head loss
    for different types of beer line and shanks (or cobra tap). You enter the items at the top:
    beer style, ...

  • Posted in thread: Stuck Taps on 02-02-2008 at 10:22 PM
    So I guess I am learning why the more expensive taps say (dont get stuck, like other versions)
    on them... But I bought the cheaper taps... and I have experienced them getting a bit sticky if
    I dont dr...

  • Posted in thread: Line Balancing Confusion on 02-02-2008 at 10:10 PM
    I'm a little confused about line balancing/regulator pressure. I have a kegerator with a two
    draft tower; IPA on one line and and an ESB on the other. I'm getting way to much foam when I
    pour either o...

  • Posted in thread: Pin lock or ball lock? on 02-01-2008 at 05:31 PM
    Unless you need a shorter keg or can get them really cheap, get ball locks. There are many more
    of them in circulation and they are more popular among homebrewers.Unless your friend happens
    to give yo...

  • Posted in thread: Serving Pressure on 01-20-2008 at 04:40 PM
    Ok, listen up ya old bastard :) :tank: Do you have at least 7 feet of 3/16" line running to the
    faucets?How did you carb your own beer, CO2 tank or priming sugar?3/16 line, between 6 and 7
    feet long.....

FORUM SIGNATURE
Up Next: ? Primary: Secondary: Nut Brown Ale: Tap 1: Cream Stout : Quote: He brews beer AND is a pilot. There is no female on this planet that would tolerate both of those time- and money-consuming hobbies at once.
0 COMMENTS
POST A COMMENT