Last Activity:12-11-2012 8:27 PM
Posted in thread: Auber Contactors on 04-03-2012 at 05:35 PM
Is there a reason not to use the contactors Auber sells when building a 240v electric kettle?
The price seems reasonable.
Posted in thread: Digital Temp Controller w/Mini Fridge on 02-18-2012 at 05:54 PM
Yes, I did wire it up with just a little rewiring. My fridge has the same colored wires, so
It's probably the same, but you should be able to check on the back of the fridge to make
sure.What I did wa...
Posted in thread: Homemade PBW - quick mix on 02-02-2012 at 10:29 PM
Thanks for the clarification!
Posted in thread: Homemade PBW - quick mix on 02-02-2012 at 06:51 PM
I believe that TSP is Tri-Sodium-Phosphate, one of the chemicals in PBW. I could be wrong, so
feel free to correct. ;)
Posted in thread: Ebay Temp Control Install on 02-02-2012 at 01:36 AM
So, my mini fridge required a little bit of fiddling to get everything running properly.As it
turned out, I had 3 wires running to my stock thermostat, Grey=120V Hot from wallBlue= 120V Hot
back to Co...
Posted in thread: Ebay Temp Control Install on 01-30-2012 at 05:54 PM
The thermo in my fridge just has a black, white, and green wire, so I'm going to have to do
some experimenting to figure out how to wire it up. Unless anyone has any ideas?
Posted in thread: Ebay Temp Control Install on 01-27-2012 at 05:03 PM
Very Nice! Would you mind sharing details of how you wired it up? I'm looking to do the exact
same thing in my mini fridge.
Posted in thread: Used whiskey barrels on 01-05-2012 at 12:03 AM
I don't believe you will find a 5 gallon whiskey barrel any commercial Distillery will be using
something much larger and 5 gallons is much too small to be economically for any good
Posted in thread: Anyone ever use a graphic design contest website for their logo? on 12-22-2011 at 08:13 PM
No offense, but just because you got paid $65 an hour, doesn't mean that you were worth that.
The market conditions determine what your time is worth.Qualified designers are using the same
CMS tools t...
Posted in thread: How tall is your home bar? on 12-07-2011 at 08:21 PM
As a fabricator and installer of custom countertops, Bartops should be 42" from the floor to
the top of the counterKitchen/prep counters 36" to the topDesk/Vanities 30"These measurements
are at the op...