Last Activity:11-27-2013 8:10 PM
Likes Given: 1
1 Likes on 1 Posts
Posted in thread: July sale $43 15" Jaybird false bottoms from Nor Cal Brewing Solutions on 07-15-2013 at 05:10 PM
Code please, if any are left
Posted in thread: Which first? on 06-18-2013 at 05:49 PM
I have both, and will go the other way. Oxygen kit. Much easier to keep shaking your starter
and/or give it a hit of oxygen before you begin the starter. Much more PITA to shake a carboy
for five minu...
Posted in thread: Outdoor kegerator on 06-11-2013 at 02:25 PM
Thanks for the ideas guys. I really like the running the taps through the wall from the
basement, if for no other reason than it just sounds cool. One other question. Do I run in to
practical line len...
Posted in thread: Outdoor kegerator on 06-09-2013 at 06:58 PM
Why not run tap lines into your basement into a kegerator.then put an outside lockable cable
box over it.SURPRISE BEER!during the winter simply drain the lines disconnect it and lock it
up.Now that so...
Posted in thread: Outdoor kegerator on 06-05-2013 at 07:29 PM
If you're going to put in on wheels, why not just leave it inside most of the time? When you
want to chill on the deck just wheel it out. It'll use less electricity that way and you won't
have to worr...
Posted in thread: Outdoor kegerator on 06-05-2013 at 04:11 PM
Hello. As the weather warms up here in Ohio and the empty bottles pile up in the basement my
thoughts turn to putting a kegerator on my back deck. Ideally, I would like a two tap kegerator
that is wea...
Posted in thread: iBrewmaster2 on 05-14-2013 at 08:31 PM
I don't know what to say about the water profiles. I have added my home water profile a couple
of different times and not had an issue with adding it from the ipad under the setup/water
profiles tab. ...
Posted in thread: iBrewmaster2 on 05-14-2013 at 06:59 PM
I still think it's a risk to purchase, but if some of these tweaks are made it really does
seem like an "all-in-one" brewing app, which to me is the magic bullet that would get me to
purchase. Right ...
Posted in thread: iBrewmaster2 on 05-14-2013 at 06:34 PM
You need to save the water profile under set up, not create a profile while working from a
batch. If you save the water profile from the set up screen, it will save the profile.I was a
beta tester on ...
Posted in thread: iBrewmaster2 on 05-01-2013 at 08:54 PM
I would like a more efficient no Sparge calculator as well. Right now, you have to get your
volumes in the same fashion as the current software, although it seems to be set up for a BIAB
profile. At l...