deadboy

LATEST ACTIVITY

• Posted in thread: Converting Newcastle Draughtkeg to use CO2 tank and party tap on 09-14-2012 at 04:46 PM
  I have a spare 5# CO2 tank and I was thinking it might be nice to put it in my fridge with a
  little 15L keg. I know they have those little taps that can take the little pellet gun style
  CO2 cartridges...

• Posted in thread: Coffin Keezer question... on 07-18-2012 at 02:18 PM
  Well, that would really mess with it's ability to hold in temp. The lid is designed to keep the
  temp in. While you still have to insulate the collar I wouldn't think it would help the
  integrity of the...

• Posted in thread: using bilge Fan & dehumidifier to prevent moisture in Kegerator on 07-12-2012 at 01:19 PM
  It depends on several factors. I managed to cut down my moisture in there by putting the temp
  sensor in a beer bottle filled with water. That prevented the coils from kicking on so often
  and that grea...

• Posted in thread: Need advice on drilling out holes for a keggle on 07-11-2012 at 08:18 PM
  THIS ^ and a step bit. one's not big enough. For a 1/2" weldless ball valve you need a 7/8"
  hole.

• Posted in thread: Need advice on drilling out holes for a keggle on 07-11-2012 at 08:16 PM
  Yeah, that bit I posted is exactly the one I have. I may need to re-sharpen it and start using
  some drill lube and/or slow WAY down.

• Posted in thread: Need advice on drilling out holes for a keggle on 07-11-2012 at 07:07 PM
  I'm setting up a HERMs electric build. To that end I'm needing to drill out holes in some kegs.
  I started out using a punchout bit like this one. It stopped working about 3/4 of the way into
  the secon...

• Posted in thread: DIY conical on 06-30-2012 at 10:08 PM
  I understand that you can drain from the bottom but I don't see how the wort doesn't come out
  with it. Maybe if there was... nope. I got nothing.

• Posted in thread: DIY conical on 06-30-2012 at 09:36 PM
  I thought one of the advantages to conical fermenters was being able to drain the yeast/trub
  out. Honestly I don't know how it would work in a normal one but I really don't know how it
  would work here...

• Posted in thread: DIY conical on 06-30-2012 at 09:02 PM
  https://sphotos.xx.fbcdn.net/hphotos-ash4/303584_10151007020421122_1873625841_n.jpgI can't take
  credit for this but does it look like it would do the job? A guy in my LBC came up with it and
  it SEEMS ...

• Posted in thread: Help with wiring diagram/parts list on 06-30-2012 at 08:30 PM
  Yeah, last thing in the world I want to do is jump in the middle of a forum fight but the
  internet is one of the absolute worst ways to communicate. There is SO much room for
  misinterpretation and so ...