Last Activity:02-22-2013 9:31 PM
4 Likes on 3 Posts
Posted in thread: Forgot the oats on 05-06-2012 at 11:03 PM
So, I had the oats separate from the rest of my grain bill, since they didn't need to be
crushed, and when it came time to brew I forgot to put them in the mash. I had already finished
up an hour long...
Posted in thread: Founders 2012 Black Party on 04-22-2012 at 02:20 PM
Anyone go last night. What was your favorite beer? I had what they called a "Rye Aged Rye
Stout" that I thought was amazing. If it hadn't been so busy in the tap room I would have tried
to find out mo...
Posted in thread: New Home Brew Club Logo on 04-02-2012 at 01:03 AM
Not really a label, but I thought this was probably still the best place to share.So anyway, I
just started a new home brew club in my area and I wanted to share the logo I designed. What do
you guys ...
Posted in thread: Method of Grain Analysis (IOB vs. EBC) What's the difference? on 03-14-2012 at 12:51 AM
I was working on adding some new grains to my ingredient list in Beer Alchemy and I discovered
there are two methods for analysing them. IOB and EBC. And while some numbers like moisture and
Posted in thread: Which wire goes where? on 01-05-2012 at 10:33 PM
Picked up this one yesterday, and just installed it. Seems to work well. I still need to get a
stir bar before I can actually test it out though.25-Ohm 3-Watt Rheostat - RadioShack.com
Posted in thread: Which wire goes where? on 01-04-2012 at 06:21 PM
Sounds good. I'll stick with 9 volt power supply for now and swap out the potentiometer.
Posted in thread: Which wire goes where? on 01-04-2012 at 01:03 PM
Thanks for the help on this guys.I liked this one because it had the on/off built in, and they
guy at Radio Shack told me it would work. I could kind of tell they weren't staffing the same
kind of exp...
Posted in thread: Which wire goes where? on 01-04-2012 at 12:25 AM
Ok, further testing show that turning the knob does adjust speed, the only problem is it is an
extremely fine adjustment, and almost unnoticeable. Imagine if you turn the knob clockwise from
left to r...
Posted in thread: Which wire goes where? on 01-04-2012 at 12:19 AM
With the positives still attached to the top two, if I touch the negatives to pin 1 (bottom)
and pin 3 (right) the fan turns on and off when pushing the button but still does not adjust
speed when tur...
Posted in thread: Which wire goes where? on 01-04-2012 at 12:11 AM
I just attached positive from power supply (black with white stripe wire) to top left pin, and
the positive from the fan (red wire) to the top right pin. When touching the negative from fan