Last Activity:02-17-2014 5:13 PM
3 Likes on 3 Posts
Posted in thread: Different E-Brewery on 01-31-2014 at 07:03 PM
Quick question, ddahl84,How high is the top of your MT? Do you stir your mash a few times
during the mash? I like the idea of a 2-tier system, because you can get away with a single
pump while the dow...
Posted in thread: Different E-Brewery on 01-31-2014 at 06:59 PM
Thanks for the nice complements. Sorry it's taken so long to reply. The couple of things I have
changed is the float switch in the mash tun, because the cheep plastic ones where not reliable
Posted in thread: Another stainless eBIAB on 06-08-2013 at 04:45 PM
I would love to see a pic of the whole system up and running. Are you going to mount the
control panel to the stand?
Posted in thread: How should I mount this pump? on 02-11-2013 at 04:17 PM
Here's where I got mine. Greatbreweh.com
Posted in thread: How should I mount this pump? on 02-11-2013 at 01:57 PM
I have that exact same pump and when I received it, I had the same question. I wanted to mount
it to my brew stand. Here's what I came up with. I bought a Blichmann ball valve, attached a L
Posted in thread: Different E-Brewery on 02-05-2013 at 08:27 PM
Is there a reason you recirculate the mash vs. Just letting it sit in the cooler for the 60
minutes?I do let the mash sit for 45-60min then recirc/vorlauf so when I start draining it into
the boil ket...
Posted in thread: 110v Recirculating eBIAB 2.5 gallon batches on 02-04-2013 at 08:54 PM
Thanks for the quick reply. I am trying to understand the wire size in relation to the fuses
that you mention. Couldn't the wire on the down side on a one amp fuse be very small in
relation to 14g and...
Posted in thread: Different E-Brewery on 02-04-2013 at 05:18 PM
Did you lose any heat while recirculating the mash?Ill have to get back to you on that one. I
have taken several readings at the end of the 60min mash and lose 1-2 degrees, then I start a
mash recirc ...
Posted in thread: 110v Recirculating eBIAB 2.5 gallon batches on 02-04-2013 at 02:14 AM
I apologize if I have missed it. The many panel pictures are hard to distinguish the wire
sizes. I have not seen any mention of the wire sizes used in the many panel builds. P-J
indicated that only th...
Posted in thread: List of PJ Electrical Diagrams on 02-01-2013 at 02:47 PM
Kevin-The diagram would work the same as well just remember everything running 30a needs 10g
wiring(contactor, element). And also the plugs and outlets used need to be 30a rated.