Last Activity:11-29-2015 9:24 PM
Likes Given: 17
28 Likes on 23 Posts
Posted in thread: Ss Brewtech’s Biggest Baddest Holiday Giveaway Ever! on 11-21-2015 at 01:44 PM
Posted in thread: Ready-to-Go Malt Mill Motors? on 11-20-2015 at 01:41 PM
No idea on the power grinder, but...Rigging up a similar thing yourself, is relatively easy,
and will cost much less.Check eBay-- you need:- probably a 1/2hp 1725-1750 rpm 1 phase, 56c
frame motor ($5...
Posted in thread: questions pertaining to stovetop kettles on 11-19-2015 at 04:38 PM
Those ceramic/glass cooktops are terrible for brewing-- they are very underpowered for this!
That said, I had some success with 2.5 gallon batches, but I had to do a split boil on mine. I
had a calpha...
Posted in thread: Commercial breweries: pellets or leaf hops? on 11-14-2015 at 01:07 PM
I work for a brewery producing ~50hl of beer, and we use pellets (for a variety of reasons).
But, yes we use pellets. Even the three local smaller breweries (with brew houses of 3.5hl to
12hl) use pel...
Posted in thread: Sanke Kegs- 1/6 barrel and 1/4 barrel on 11-13-2015 at 01:16 AM
Posted in thread: Sanke Kegs- 1/6 barrel and 1/4 barrel on 11-12-2015 at 11:53 PM
I have four 1/6 barrel (5.16 gallon and 9" diameter) commercial sanke kegs, and one squat 1/4
barrel pony keg (same width as a 15.5 gallon half barrel keg).These are perfect for homebrew; I
have been ...
Posted in thread: Commercial 3 well sink with Pre-Rinse sprayer and macerator/disposal + SS table on 11-11-2015 at 04:28 PM
I have a used commercial three well Restaurant stainless sink with additional small bowl with
side port for refuse to feed the disposal/macerator. The sink was filthy from service, but I
cleaned it wi...