VIEW MY

Cuzco_Brew

Gift Premium Subscription To Cuzco_Brew

Join Date:

09-24-2008

Last Activity:

11-04-2013 8:08 AM

Likes Given: 1

    ABOUT ME

  • Cusco - Peru
  • Brewing
  • APA
  • Empty
  • Brown Ale
    APA
  • Male
  • Married

LATEST ACTIVITY

  • Posted in thread: Nano Brewery Build on 04-29-2013 at 09:19 PM
    I whirlpool in the kettle. Was doing that as a home brewer so designed the system to be able to
    do it the same way. Works fairly well, I tried using the trub filter from Brewers Hardware with
    this set...

  • Posted in thread: Nano Brewery Build on 04-29-2013 at 09:00 PM
    I am using CFC, this one from MoreBeer. The ground water here is around 13C and I have a second
    home made CFC hooked up to the glycol tank that I can use if need be. I normally send it to the
    fermente...

  • Posted in thread: Nano Brewery Build on 04-29-2013 at 07:27 PM
    Necro bump indeed. We ended up getting a 2BBL system built here. It's a two vessel no sparge
    setup, Mash Tun and Boil Kettle. We have a fermenter big enough to hold about 4BBL, so we brew
    twice to fil...

  • Posted in thread: Questions on Filtering on 07-30-2012 at 07:30 PM
    3. I don't believe it would be possible to gravity feed these. I only single stage filter, but
    even then I have had to bump up the pressure a bit as the filter starts to clog. My process for
    filtering...

  • Posted in thread: Automating direct fired MLT with BrewTroller on 07-30-2012 at 07:29 PM
    The Brewtroller / OpenTroller can do both PID and simple on/off for temp control. I was under
    the impression you should use the on/off mode for a gas setup, but you are saying you can use
    the PID sett...

  • Posted in thread: Questions on Filtering on 07-30-2012 at 06:15 PM
    I am looking to add a 2 stage filter to my brewing system for filtering the beer post
    fermentation. Like the one in this thread. I have a few questions for those that use a system
    like this.1. What's ...

  • Posted in thread: I will build your IPA/IIPA (Part 2) on 07-11-2012 at 07:04 PM
    A slightly odd request for more than a few reasons, especially for someone who has never brewed
    an IPA, but wants a 12 gal batch under a 120 min boil w/dry yeast. I tried my best with what
    you gave me...

  • Posted in thread: I will build your IPA/IIPA (Part 2) on 06-30-2012 at 12:09 AM
    I am game. As I live outside the US I am a bit limited with ingridients. But am will to
    try...Please answer the following:*All-Grain, *If All-Grain, what is your estimated efficiency?
    70%*Boil time? I...

  • Posted in thread: New Chiller on 06-27-2012 at 01:14 AM
    I got my new counterflow chiller today. My new setup will be pretty much all TC fittings, so I
    paid the extra to get the chiller with the TC fittings. And to be honest I am a little
    disapointed. The w...

  • Posted in thread: Automating direct fired MLT with BrewTroller on 05-25-2012 at 04:44 PM
    If you absolutely, positively have to go high pressure propane, is there a safe way to automate
    it other than the spark ignition? Is that even safe?Eventually what I want to be able to do is
    fill my m...

0 COMMENTS
POST A COMMENT