Last Activity:09-06-2012 1:43 PM
Posted in thread: 24 gallon Conical for sale on 05-24-2009 at 03:53 AM
Hey, I'm located in Durham, NC.
Posted in thread: 24 gallon Conical for sale on 05-23-2009 at 07:54 PM
I have a 24 gallon heated/cooled conical from morebeer for sale. You can get all the spec's at
morebeer.com. Let me know if anyone is interested. I'm located in Durham, NC.Sells new for
$2350. Make of...
Posted in thread: locating a "fill while you wait" propane, CO2? (NC) on 08-27-2008 at 11:26 PM
I get my tanks filled at Ace Hardware, I know BJ's re-fills, I think Sam's Club does too.
Posted in thread: big kettle-physics problem on 06-09-2008 at 01:05 AM
Hey, just thought I'd chime in real quick. I use a 30 gallon aluminum pot. I ended up using 2
burners to bring to a boil. Once boiling I'm able to maintain a nice rolling boil with one. I
Posted in thread: Bazooka T and I.C. Conflict in Keggle on 05-04-2008 at 01:36 PM
I made three short legs for my IC to clear my bazooka screen. In doing this I was able to
position the chiller in the center of the keg for better cooling. I made the legs by modifying
3 copper tee's ...
Posted in thread: Anyone ferment in converted keg?? on 04-22-2008 at 01:06 AM
I used kegs for quite a while. Until I was able to buy my conical. I tried several variations
for lids, ranging from clear plexiglass to a 12'' domed lid from a pot. I always use blow-off
tubes, this ...
Posted in thread: Secondary, Keg or Carboy on 04-15-2008 at 01:28 AM
You can skip the secondary and leave it in the primary carboy for 2 to 3 weeks without any
worries. Then, fill you keg, carbonate, and wait as long as you can before cracking the tap!
The longer you w...
Posted in thread: Immersion chiller question on 04-14-2008 at 08:50 PM
I use a 1/2 hp utility pump from Sears. I brew 20 gallon batches and use a large 30 gallon
garbage bin to hold my ice blocks/water. I recently tried to cool a 20+gal to 50 degrees. I was
only able to ...
Posted in thread: Conical/lager question on 04-13-2008 at 09:34 PM
Hello. I brewed my first lager last Sunday. I'm using a conical and was wondering if and when I
should dump the yeast/trub. I'm fermenting at 50 degrees and I'm not seeing very much airlock
Posted in thread: Burner or Burners under a BIG KETTLE on 02-04-2008 at 01:12 AM
I just built a dual burner set-up for my 30 gal brew pot. I used 1'' black pipe as a stand for
the pot, a made legs for the two burners. I only brewed once with this set-up, but I'm pleased
with it so...