- Posts 30
Last Activity:01-02-2015 10:53 PM
1 Likes on 1 Posts
Posted in thread: Should I try to fix Blichmann Brewmometer? on 01-02-2014 at 01:20 AM
Where did you order it from and how long have you had it? I ordered one back in October from
Northern Brewer and when I went to use it in November it got water in it and clouded up. I
tried to figure ...
Posted in thread: Anyone used this? Sanke to corny conversion kit? on 06-30-2013 at 06:05 PM
Yes I got mine about a month ago, it works great haven't had any problems and it makes it much
easier to connect a commercial keg without having to swap lines, if you use commercial kegs and
Posted in thread: Filtration on 03-17-2013 at 05:13 PM
When I filter I use a cartridge filter I got from more beer.com, it was around the same cost as
the plate filter and works great. I run mine at about 5psi and it takes about 15-20 min to fill
Posted in thread: Using plate chiller to recirculate mash on 02-21-2013 at 03:10 PM
cuart682, thanks for coming back to life on this thread :)Looking at my original post, I guess
I was confused and thought that a Chillzilla was a plate chiller, not a counterflow chiller.
Glad to hear...
Posted in thread: Using plate chiller to recirculate mash on 02-15-2013 at 03:03 PM
I do currently still use my cfc as a herms, I have never had any problems with clogs or
anything gumming up on me. I still have not added a temperature controller to the system
because it looks like I...
Posted in thread: splitting a starter into 2 buckets on 02-12-2013 at 02:44 PM
I split starters all the time, all I do is make sure it's stirred very good and all the yeast
is mixed into the starter and not on the bottom of the flask and then pour 1/2 into one batch
and the rest...
Posted in thread: Growler / bottle filler on 02-01-2013 at 04:35 PM
I fill growlers and bombers for use within a few dayswith a hose connected to my faucet or with
a picnic tap with a racking cane stuck into it. I have had beers bottled this way last for 3-4
Posted in thread: Kegs - Chilling then Removing to Room Temp? on 02-01-2013 at 04:25 PM
I have taken many chilled kegs and then let them sit at room temp with no problems. I would
recommend trying to keep the warmed kegs at a stable room temp I one or two kegs go bad that I
had in my gar...
Posted in thread: Brew day gathering? on 02-01-2013 at 03:35 PM
I recently started a new rule that drop ins do not get offered a beer. I live on a main road
through the neighborhood and people tend to drive by and see me out there and drop in for a
beer. My issue ...
Posted in thread: Whirlpool port on kettle? on 01-29-2013 at 06:17 PM
I have a chilzlla form northern brewer that I use to whirlpool through back into my kettle and
it works great, I have never had any clogs and I can get a very nice whirlpool in the kettle, I