VIEW MY

cswank

Gift Premium Subscription To cswank

Join Date:

03-29-2008

Last Activity:

10-10-2013 6:27 PM

LATEST ACTIVITY

  • Posted in thread: Digital sight glass on 02-11-2012 at 06:33 PM
    I tried a pressure sensor like this, but I had to go to something else because the pressure
    reading was fluctuating so much during the mash that I couldn't trust it.I have a three tier
    system, and the...

  • Posted in thread: Mash Temperature Inversion on 10-26-2011 at 11:08 PM
    Thanks for the suggestion. My probe is ~1" above the bottom when it is in place. The bottom of
    the pot does have some layers of other metals that could hold a bunch of heat from when the hot
    water pou...

  • Posted in thread: Mash Temperature Inversion on 10-26-2011 at 09:02 PM
    I have heating pads on the outside that kick automatically in when the temperature falls too
    low. The temperature difference happens right away before the hearing pads turn on.

  • Posted in thread: Mash Temperature Inversion on 10-26-2011 at 08:55 PM
    I guess what I really want to know is if an 8 degree F temperature differential between the top
    and bottom of the mash is common.

  • Posted in thread: Mash Temperature Inversion on 10-26-2011 at 08:09 PM
    Hello, I'm just wondering if anyone else has noticed a large temperature inversion in the mash.
    I have a temperature probe that comes in from the top of my mash vessel (a large stainless
    pot), and I c...

  • Posted in thread: What's an accurate evaporation rate for the hour long boil? on 07-12-2011 at 11:49 AM
    Good god, why didn't I think of that? Thanks!

  • Posted in thread: What's an accurate evaporation rate for the hour long boil? on 07-12-2011 at 01:26 AM
    I have an automatic brewery that I've been using for 7 batches now. It is all enclosed in a
    attempt to retain heat during the mash, and to not get my basement all steamy when I brew (all
    electric). I ...

  • Posted in thread: Electric burner idea for brew kettle on 01-05-2011 at 12:31 AM
    Hello DeafSmith, did you get it working? I am striving for the same thing but am having
    problems (see my post at sum up, my electric burners had an electrical leak that caused a
    ground fault, trippi...

  • Posted in thread: Ideas for a water supply line on 03-27-2010 at 06:54 PM
    I like the PEX. I already have the water line running to my brewery. One step closer...

  • Posted in thread: Ideas for a water supply line on 03-27-2010 at 03:27 PM
    Thanks to the PEX suggestions. I must amend my original 'I think that's the way to go, for
    sure.'

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS