csamson

LATEST ACTIVITY

• Posted in thread: My Electric Build - Introducing What Became Brewmaster Controls on 05-17-2013 at 04:08 PM
  having the same problem. better pay that go daddy bill! :smack:

• Posted in thread: Cedar Bar/Keezer Build on 05-01-2013 at 02:13 PM
  Ridin dirty ;)119186

• Posted in thread: Cedar Bar/Keezer Build on 04-25-2013 at 04:27 AM
  HOLY HELL Man.....that is looking awesome! I have been away from HBT for waaaay too long. I
  have been pursuing another business opportunity, so all spare time for the past few months has
  been devoted ...

• Posted in thread: Cedar Bar/Keezer Build on 04-16-2013 at 05:26 PM
  Thanks guys! I'm really pumped for this to be finished. It's getting really close now. All I
  really have left is finishing coats on the top and frame and attaching the top. Put my first
  coat of finish...

• Posted in thread: Cedar Bar/Keezer Build on 04-15-2013 at 04:33 PM
  This last week I epoxied the worm holes that went through the top of the bar. I went with West
  System 207 epoxy which cures clear so that I can see into the holes and should add more
  character. It was...

• Posted in thread: Cedar Bar/Keezer Build on 04-11-2013 at 03:29 PM
  more pictures:

• Posted in thread: Cedar Bar/Keezer Build on 04-11-2013 at 03:27 PM
  I bought some heavy duty 10” hinges from HD to attach to the frame and a ply wood top that will
  be screwed into the cedar slab. Got the plywood top cut and hinges installed. Also, put in the
  middle wa...

• Posted in thread: Keezer Build. Help! on 04-09-2013 at 10:11 PM
  You could build a base for the freezer to raise it up within a few inches of the bar top? If
  you need it to roll out you will have to attach wheels/casters to the base anyways. That would
  get you clos...

• Posted in thread: Cedar Bar/Keezer Build on 04-08-2013 at 03:46 PM
  This weekend I was able to get both pieces planed down to the same height and flat. I took them
  out to a guy who had a 36” drum sander and it worked out pretty well. I used a hand plane to
  get the edg...

• Posted in thread: Cedar Bar/Keezer Build on 04-04-2013 at 02:38 PM
  Moved the casters out as far towards the edges as possible to help with a tipping issue and
  built up the walls of the frame. Still need to add a cross bar on each end to add additional
  support and a m...