VIEW MY

creeksidebrewery

Gift Premium Subscription To creeksidebrewery

Join Date:

01-13-2014

Last Activity:

04-15-2014 8:17 PM

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: Show us your Kegerator on 04-02-2014 at 01:57 AM
    I will post more information on the pelters once I get my cold plate chiller built. I can tell
    you that I brought one plate to work so I could test it's draw. At 12 volts it's pulling 6
    amps. I have a...

  • Posted in thread: Chilling beer before facuet on 03-31-2014 at 03:09 PM
    I have the keezer up and running. See the show us your kegerator thread. I'm going to use 3
    Peltier plates affixed to a cold plate to achieve this last minute chilling effect.Sent from my
    iPhone using...

  • Posted in thread: Show us your Kegerator on 03-30-2014 at 02:50 AM
    Peltier testing189525Sent from my iPad using Home Brew

  • Posted in thread: Show us your Kegerator on 03-30-2014 at 02:50 AM
    Hello folks, I finished my basement and built a bar down there. To conserve space and to be
    closer to my brewing area, I wanted to have my keezer in the unfinished portion of my
    basement--50'feet away...

  • Posted in thread: Used bar equipment on 03-21-2014 at 04:59 PM
    I often find myself wondering what to bars and restaurants do with their old equipment when
    they close or remodel? Does anybody know of any auction sites where this equipment is sold?
    Sent from my iPh...

  • Posted in thread: Chilling beer before facuet on 03-08-2014 at 08:48 PM
    I'm actually going to push the beer back in with water. So each cycle, the lines will
    essentially get a rinse.Sent from my iPhone using Home Brew

  • Posted in thread: Chilling beer before facuet on 03-08-2014 at 08:38 PM
    50 feet. I'm circulating keezer are through a PVC pipe which the lines are run through which
    helps. I'm rigging up a system to push the beer back into the keg when drinking time is over.
    Now I just ne...

  • Posted in thread: Chilling beer before facuet on 03-08-2014 at 08:28 PM
    Hello, I have a long beer line run and the beer is warming up slightly by the time it reaches
    the faucet. Is there some kind of device I can put right before the faucet to chill the beer
    back down?Sen...

  • Posted in thread: Pushing beer back into keg on 03-07-2014 at 01:54 AM
    I have a very long beer line run. The lines are run through a 3inch pvc pipe which circulates
    cold air through it. With this, I can achieve about 50 degrees for the lines which a bit on the
    warm side ...

  • Posted in thread: Vinyl to pex adaptor on 03-05-2014 at 07:17 PM
    Anyone know of an adaptor that will go from 1/2 ID vinyl to 1/2 pex?Sent from my iPhone using
    Home Brew

0 COMMENTS
POST A COMMENT