VIEW MY

cravej

Gift Premium Subscription To cravej

Join Date:

01-31-2010

Last Activity:

07-08-2014 9:21 PM

5 Likes on 5 Posts 

    ABOUT ME

  • Philly
  • Single

LATEST ACTIVITY

  • Posted in thread: pest control on 07-08-2014 at 11:55 PM
    Some pest is killing my hops. I noticed some of the cones turning brown, so I pulled one apart
    and this little worm fell out.What's the best way to protect the plants?

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 11-01-2013 at 02:58 AM
    Great stuff! I was wondering what you're using to regulate the LP pressure from the tank. It
    seems that there aren't a lot of choices to get down to the .5 PSI required for the Smart
    Valves. Speaking ...

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 10-27-2013 at 10:40 PM
    I brewed a Saison today and it went pretty smoothly. I think my one burner is running too rich,
    I might of drilled out the orifice a little too much. The air vent is wide open, but it
    continues to get...

  • Posted in thread: All Grain Setup - Adding a Pump on 10-22-2013 at 04:10 PM
    I don't think you need a valve at point 3. If it is above the liquid line, then nothing will
    flow out, but it can still be used as a return. I put a valve right at the output of the pump
    and one at ea...

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 10-18-2013 at 01:37 AM
    I replaced the valve, that I stripped out. I like this one better anyway.

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 10-14-2013 at 11:32 PM
    Here is an older drawing of it. I sized it to accept a 25 or 30 gallon pot. I'm 6'4" tall, so
    the upper tier is no problem for me, but I could see that being a problem for others.

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 10-14-2013 at 01:41 PM
    I brewed on it yesterday, but it didn't go very smoothly. This was my first attempt at fly
    sparging and I also attempted a step mash, and it ended up getting stuck. Since it wasn't
    flowing very well...

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 10-14-2013 at 12:55 PM
    really beautiful system man. Very clean.I'm planning my own system now and trying to make sense
    of this Low/High pressure deal. I'm looking forward to hearing how it goes with the drilled out
    orifice....

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 10-13-2013 at 02:18 AM
    I finished the mash tun, so I'm ready to test it out and brew a Rye IPA tomorrow.

  • Posted in thread: My Brewstand: SS two tier w/ temperature controls on 10-10-2013 at 05:10 PM
    Cool. Was that the highest output for the burner?Cheers!That was the highest output. I'm using
    a low pressure (10.5" WC) regulator, and I drilled out the orifice with a #48 drill bit. I'm
    afraid to dr...

0 COMMENTS
POST A COMMENT