Last Activity:12-05-2013 6:01 PM
1 Likes on 1 Posts
Posted in thread: 3 or 4 Pass Cold Plate for Jockey Box on 05-23-2013 at 06:51 PM
Looking for a 3 or 4 pass cold plate to use in a jockey box. Something in decent condition. I
don't mind having to clean it, but it needs to be cleanable. Thanks
Posted in thread: All in 1 Compact Pre/Counterflow Chiller w/Pump on 02-06-2013 at 10:20 AM
This looks very nice, well done :)However, isn't the extra chilled water flowing in the same
direction as the beer? or does the beer not output at the thermometer? Seems like the pre
chiller coil shou...
Posted in thread: Why did my electric element get rusty? on 09-25-2012 at 12:09 AM
That does sound like the reason, thanks for the info! :)
Posted in thread: Why did my electric element get rusty? on 09-24-2012 at 09:35 PM
The element in my HLT is rusty after using it for the last 6 months or so. It's corroding where
the element is connected to the threaded connector. drain all of the water out after I'm done
Posted in thread: Black forest stout tastes too roasty on 06-29-2012 at 03:52 AM
I have no idea why the bottles would be different from your keg, but I've had similar problems
with too much roast flavor in my stouts before. This 4th of July I'm going to brew a stout with
all of th...
Posted in thread: Black forest stout tastes too roasty on 06-29-2012 at 03:41 AM
I recently brewed the Black Forest Stout recipe from Brewing Classic Styles. Lots of great
stuff in that book, so I'm not blaming the recipe. A few weeks after kegging and carbonating
though it starte...
Posted in thread: How easy is it to get a small sample from a conical with a butterfly valve? on 04-21-2012 at 07:26 PM
My roommate just made me realized that I could just put a butterfly between the racking port
and the sample valve. That way when it's time to actually rack I can close the butterfly,
remove the sampli...
Posted in thread: How easy is it to get a small sample from a conical with a butterfly valve? on 04-21-2012 at 04:37 PM
What you need is a sampling valve. They make them to fit the 1/2" to 3/4" triclover ferrule. It
has a knurled delrin knob that micro adjust out when turning counter clockwise. There are some
Posted in thread: How easy is it to get a small sample from a conical with a butterfly valve? on 04-21-2012 at 01:02 AM
Got some info on that sample valve if anyone is interested. My email:"I was wondering how
exactly the SMP-50-150 - TriClamp 1 1/2" x 1/2" Sampler Valve works. Do you twist it like a
garden hose valve ...