VIEW MY

cornhole

Gift Premium Subscription To cornhole

Join Date:

03-04-2010

Last Activity:

06-14-2013 8:07 AM

    ABOUT ME

  • Pella, Iowa
  • Single

LATEST ACTIVITY

  • Posted in thread: Making StarSan in small batches on 05-17-2012 at 09:53 PM
    6ml starsan to 1 gallon water or 4 quarts water3ml starsan to 2quarts water or .5 gallons
    water1.5ml starsan to 1 quart water or .25 gallons water

  • Posted in thread: 110v to 3v??? on 05-03-2012 at 03:44 PM

  • Posted in thread: Variable resistance SSR for boil control? on 03-06-2012 at 07:34 PM
    Would this work for speed control on an AC Motor?

  • Posted in thread: Spa Panel Wiring for Dummies on 02-28-2012 at 05:56 PM
    The spa panel discussed in this thread is described twice as being 240 watts on the home depot
    website, the first one I though was a typo, but am I missing something? A basic example: 240V
    * 50 Amps ...

  • Posted in thread: Soldering Stainless steel on 12-05-2011 at 04:14 PM
    I am looking for ideas to solve a small problem. The first solder I did the joint was fairly
    tight and the solder stayed at the joint. The second joint wasn't so tight so solder flowed
    through onto th...

  • Posted in thread: Beerquarium on 11-23-2011 at 01:10 PM
    I use two aquarium heaters and two submersible pumps. The pumps are always on and create a
    consistent temperature of water throughout. The heaters are cranked all the way on, and
    controlled with a sep...

  • Posted in thread: Soldering Stainless steel on 11-18-2011 at 06:29 PM
    Finally!!! :rockin:It's not pretty at all, but I finally got a good solder all the way around.
    I soldered a washer to a street elbow for a bulkhead fitting. My 5 keys to success: 1. Oatey
    liquid solde...

  • Posted in thread: Wiring a 12v cooling fan. on 11-17-2011 at 06:56 PM
    Can any one tell me if this power source is ok to use with these case fans?I tried it, and it
    did in fact power them up. But Im not sure it it's the correct one to use.Did the fans spin? If
    so, either...

  • Posted in thread: Welding on 11-09-2011 at 02:54 PM
    Maybe consider renting one vs. buy? Unless you have a lot of other plans for a welder.

  • Posted in thread: Ideas for building HLT "elevator" in 3 tier rig... on 11-08-2011 at 01:48 PM
    I bought a nice, cheap ($20) system for lifting and hanging a deer carcass. System includes a
    set of pulleys, rope, metal bar for lifting/hanging deer (or a large kettle) and a rope locking
    mechanism....

0 COMMENTS
POST A COMMENT