Last Activity:04-17-2013 9:25 PM
Posted in thread: Counter flow chiller sanitation on 04-18-2013 at 02:24 AM
I have a duda diesel counter flow chiller. On my last brew I did a back flush to clean it, but
some water remained in the chiller. Now I'm worried that something could be culturing in there
that I can...
Posted in thread: Donít fear the Starsan foam, a math explanation on 03-05-2013 at 02:09 AM
I imagine the tubing and the counter flow chiller if filled to max with solution would be less
than 1 liter. Its the bubba diesel chiller, and the tubing dimensions previously mentioned are
of course ...
Posted in thread: Donít fear the Starsan foam, a math explanation on 03-05-2013 at 02:02 AM
I'm a little worried about using starsan. I just brewed my first batch ever (feels pretty good)
and I used a counterflow chiller.I have ocd. As in I check knobs (stove and door) and such and
so my rec...
Posted in thread: Wood collar not sitting flush on 11-03-2012 at 01:45 AM
Well I am very pleased that the basic silicone sealant was strong enough to hold down the not
so square 2x4 frame. Its been working nicely. Im very excited, or pleased rather, and fat tire
Posted in thread: Wood collar not sitting flush on 10-27-2012 at 02:29 AM
I have one more question, interested to hear your feedback. I just finished installing
everything and bought a sixth barrel of fat tire. I did not flush the lines but I did wash the
faucet and the keg...
Posted in thread: Wood collar not sitting flush on 10-19-2012 at 08:04 PM
also can kegs explode if they freeze? Im wondering what would happen if my johnson thermostat
malfunctioned. trying to stay safe.
Posted in thread: Wood collar not sitting flush on 10-19-2012 at 06:22 PM
It's CO detectors that one buys, not CO2.co2 detectors are sold, they are relatively much more
expensive and intended for co2. I've not heard of anyone using them for kegging. co2 can pose a
risk, I o...
Posted in thread: Wood collar not sitting flush on 10-19-2012 at 05:54 PM
It worked out.This is in my room. Does anyone use co2 detectors? I dont want a leak to smother
me or anything.
Posted in thread: Wood collar not sitting flush on 10-14-2012 at 08:33 PM
two ten pound weights on both raised sides is enough to hold it down. the wood has more flex
than I thought. I think that if I let the silicone sealant cure for a week with a heavy weight
on top it wi...
Posted in thread: Wood collar not sitting flush on 10-14-2012 at 07:49 PM
Hello all, first post here.I built a wood collar for my keezer project, but it does not sit
flush. One corner is raised, and if I press it down the opposite corner raises up. If I apply
pressure to bo...
- RIMS for Dummies
- question on a keggle I just made
- Another Ward report thread -
- What Saison Water Profiles Have You Had Success With?
- 80 Quart Stainless Kettle with Lid for $55 plus shipping
- Pretty Sure I Have Mold. What To Do?
- Making Traditional rice Wine. Cheap, Fun, and Different
- Mistakenly got Melanoidin instead of Carafoam for a Helles. Thoughts?
- Recipe question
- Wort Chiller friends (pic)
- Brewing in San Diego