cmdour

LATEST ACTIVITY

• Posted in thread: Arduino - Networked Temperature Monitor on 09-24-2012 at 11:05 AM
  Got the communication between the Arduino and RPi working, so now I can monitor and control the
  One-Wire devices (4 ds18B20 and 2 ds2406+ devices so far) on the Arduino from the RPi.Next step
  is to wi...

• Posted in thread: Arduino - Networked Temperature Monitor on 09-21-2012 at 03:52 AM
  I picked mine up from Adafruit. I got the larger one, since it's got a bigger antenna, better
  reception. It was driving me NUTS until I figured out that it was searching for the SSID, even
  after I tol...

• Posted in thread: Arduino - Networked Temperature Monitor on 09-20-2012 at 04:34 PM
  I wound up picking up one of the Netgear wireless dongles (nice and small, don't really stick
  out much at all), and got it working pretty easily with the RPi distro - had issues getting it
  to work eas...

• Posted in thread: Arduino - Networked Temperature Monitor on 09-20-2012 at 01:12 PM
  Followed you over from the RPi thread, and subscribed to this one as well. Have you taken a
  look at the Gertboard they're coming out with? Looks like it handles the level shifting, the
  ADC (DAC as wel...

• Posted in thread: Raspberry Pi Temp Controller on 09-11-2012 at 02:36 PM
  Adafruit, has rolled their own distro that has the I2C/1-wire, and many other features
  pre-compiled.I'm looking at several different options right now that will comprise a multiple
  thermo/SSR setup.Th...

• Posted in thread: Raspberry Pi Temp Controller on 09-10-2012 at 04:15 PM
  I don't have the schematic for wiring the raspberry pi but I can put something together.Great
  info - thanks! I know I would certainly appreciate you putting together a schematic for wiring
  up the Pi w...

• Posted in thread: Anyone have a grain mill I can use for a few minutes? on 09-08-2012 at 12:29 PM
  I'd find a lhbs. I'm sure they will help you out.This happened to me once. Its the reason I got
  my mill.Sounds like a FLHBS just offered. This is also the reason I have a mill on order :)If
  you want t...

• Posted in thread: Anyone have a grain mill I can use for a few minutes? on 09-08-2012 at 03:39 AM
  I have what I thought was an extract & crushed specialty grain kit I was going to brew on
  Sunday . . . turns out it's an uncrushed partial mash kit, and my Barley Crusher isn't due for
  a few weeks (da...

• Posted in thread: Raspberry Pi Temp Controller on 09-06-2012 at 02:29 PM
  Hi Steve, I'm interested in this. Could you maybe post a schematic for the hardware?I'm very
  interested in seeing this, too - I'm debating using a Raspberry Pi as a central control unit
  for an electri...

• Posted in thread: Restatement Eight on 08-20-2012 at 02:09 PM
  Brewed up a batch of this Saturday morning - couldn't get Simcoe hops anywhere up here, and had
  to replace them with Summit for the full boil and Zythos for the later additions. Blew the top
  off the f...