Last Activity:10-27-2016 9:44 AM
Likes Given: 8
6 Likes on 5 Posts
Posted in thread: Drip tray mounting on 08-08-2016 at 02:28 PM
So about 18 months ago I build my keezer from a GE chest freezer. I attached a collar with 2x4
red oak. Since then, i have been trying to come up with a way to attach my drip tray (which is
a 19x4 sta...
Posted in thread: HomeBrewSupply Amcyl Brew Kettle w/ 3-Piece Ball Valve Giveaway! on 08-08-2015 at 05:35 PM
Posted in thread: First time kegging problem on 05-13-2015 at 04:20 PM
So it took a lot of trial and error, but it turned out several leaks started up quite a bit
after I had started the gas system up in the first place. One on each keg, and one off of the
Posted in thread: First time kegging problem on 05-12-2015 at 04:15 PM
get your beer cold I like 33 F put it on gas for 36 hours at 30 psi purge you kegs and set at
severing pressure for 12 psi and drinkit gets really good about 24 at the 12 psiafter 3 or 4
Posted in thread: First time kegging problem on 05-12-2015 at 04:14 PM
If all the levers are pointed down, doesn't that let gas through all the valves?Then you would
end up with an empty tank and uncarbed beer.Sorry, I should have been more precise. The two
that had kegs...
Posted in thread: First time kegging problem on 05-12-2015 at 03:37 PM
They don't work that way. If they're pointing towards the gas line then they're fully open. If
they're pointing to the full left OR right then they're fully closed.I thought so, which is why
Posted in thread: First time kegging problem on 05-12-2015 at 03:16 PM
It was actually closed by that point. Should have mentioned that too.Sorry.
Posted in thread: First time kegging problem on 05-12-2015 at 03:10 PM
OK HBT, I need some help, and pretty badly.I just kegged beers for the first time on Sunday. I
had a full, brand new CO2 tank connected to a Governor regulator, which was going to a 4 way
Posted in thread: Making a keezer collar - Advice needed on 05-07-2015 at 02:37 PM
So here is the collar both before and after the staining. I ended up going with 1x6 red oak,
because the miter couldn't get through a 1x8 and a 2x6 was way too expensive. I used Kona
colored stain, tw...
Posted in thread: Making a keezer collar - Advice needed on 04-30-2015 at 08:44 PM
Thanks for the advice. Once I get to cutting and putting things together I'll let you know how