Last Activity:12-12-2013 7:41 AM
Posted in thread: Chicago-22oz Sam Adams "perfect pint" glasses on 11-24-2013 at 10:21 PM
I'm interested in two glasses if you're willing to ship: 49506.Thanks, Todd
Posted in thread: Unloading - E-Rig stuff and more on 10-03-2013 at 03:24 PM
@WileE65, timmber, cank, evandenaThe hose is 1/2" ID thick wall. It's got to be close to 3/4
but I'd have to bust out the caliper. And I lied about the quantity - I dug it out and I have 3
Posted in thread: Unloading - E-Rig stuff and more on 10-03-2013 at 01:54 AM
Aaron,Shoot me an email: email@example.com. I have a nephew who lives in Des Moines, so local
pick up would be possible for me.Thanks,Todd
Posted in thread: Little Giant pump, March pump head / impellers on 07-26-2013 at 10:44 PM
PM sent on the wet-end assemblies.
Posted in thread: My EHERMS setup on 06-21-2013 at 12:35 PM
Why only one PID? I have an RTD in the HLT and one in the boil kettle. I will be using the BK
to heat strike water and boil my wort after the mash. During the mash I will be recirculating
the wort thr...
Posted in thread: My EHERMS setup on 06-20-2013 at 04:55 PM
Nice job! I'm close to finishing my sytem: single tier, three kegs, two 5500 elements, one PID,
and two pumps. I'm getting ready to mount my probe for the PID. Where did you mount yours?
Posted in thread: Keggle, Step Bit, and Burned Metal on 06-20-2013 at 12:47 PM
Okay, got a 1.25" punch from work. Finished up the existing 1" hole and put a new 1.25" hole in
another keg. All is well! Thanks everybody for the help.
Posted in thread: Keggle, Step Bit, and Burned Metal on 06-18-2013 at 08:37 PM
I have drilled about three dozen holes in close to two dozen different kegs on the same pair of
Harbor Freight uni-bit/step bit drills. I use a foaming cutting oil for stainless steel (also
Posted in thread: A tip for those buying Step Bits / UniBits / keggle drill bit on 06-18-2013 at 03:49 PM
[quote=Golddiggie;5283965]You were probably spinning the bit too fast, so you hardened the area
around the hole. You can try to break through that with a grinding attachment, just be sure you
Posted in thread: Keggle, Step Bit, and Burned Metal on 06-18-2013 at 02:12 PM
Okay, so I used a Harbor Freight step bit to get a 1 1/4" hole in my keg for an element. I
can't get the hole bigger than 1" and the bit started burning the stainless, even with plenty
of lubricant (W...