Last Activity:03-10-2013 8:43 PM
Posted in thread: Cranberry Wheat on 01-05-2012 at 05:06 PM
You're right, but we have to wait for the OP to get back. I got the impression he wasn't
familiar with the phrase "grain bill" earlier.At any rate, you can use ~50% wheat and ~50%
pilsner malt and you...
Posted in thread: Cranberry Wheat on 01-04-2012 at 07:51 PM
Did you bottle yet? How did this turn out?When Deggenbe asked about your grain bill, what he's
asking is what grains you mashed and how much of each. I'm also curious about this.Thanks.
Posted in thread: Where do you guy GF ingredients? on 06-13-2011 at 05:12 PM
A friend of mine is a celiac and I've recently been teaching her to brew because she's sick of
red bridge and interested in brewing her own GF beer.I have 3 questions - Do GF brewers ever
mash? If so,...
Posted in thread: $100 Aluminum RIMS tube build on 04-21-2011 at 02:14 AM
OK team. I want to present my RIMS tube plan. It's $100 without shipping from MSC Direct. I
have to cite all the SS RIMS tube articles on HBT, without them I wouldn't know what else to
do.It's much mo...
Posted in thread: Why didn't my silicone stick? on 04-18-2011 at 07:23 PM
What happened here? I hate to resurrect such an old thread but this is something i'll be doing
Posted in thread: Pumping Cold Water in an IC via March Pump? on 03-14-2011 at 06:50 PM
I guess the biggest thing I'll have to check is what kind of pressure the hose will encounter,
as that pipe will bottle neck flow. Walker, I get the same impression about why people use the
Posted in thread: Pumping Cold Water in an IC via March Pump? on 03-14-2011 at 05:57 PM
I've been feeding my 3/8" (I think, but it's for sure smaller than 1/2") Copper IC via gravity
from a bucket perched on a stool. I've recently built a frame for my brewery and this is no
longer as sim...
Posted in thread: Soldering Keg Plumbing: Where is it appropriate? on 03-14-2011 at 05:15 PM
I think you guys are right about not being able to reconfigure my kettles, that's probably
something I'll want to do in the future.Question answered, i'm not soldering this stuff
together. For fitting...
Posted in thread: Soldering Keg Plumbing: Where is it appropriate? on 03-14-2011 at 04:56 PM
This is true, and it was the only drawback I could come up with. I think I could do pretty well
with pipe cleaners and pumping cleaning fluid through, but I'm not sure. Not every one of these
Posted in thread: Soldering Keg Plumbing: Where is it appropriate? on 03-14-2011 at 04:43 PM
Alright team, I have a soldering design question. I have 2 SS kegs and have soldered in 1/2" ID
female SS couplings. Now, I have SS plumbing attached to each of these couplings, which is