VIEW MY

chippy_23

Gift Premium Subscription To chippy_23

Join Date:

12-03-2008

Last Activity:

12-01-2012 7:59 PM

2 Likes on 2 Posts 

    ABOUT ME

  • fixing up my old mustang
    and my old house
  • ranger
  • I like almost all of it
  • I was looking at a Mr. beer kit for years. I had my wisdom teeth pulled and had 48 hours of no sleep to mainline brewing information. I found a kit on Craigs list and then I went to the local home brew supply shop then brewed my first two batches the next day. Since then I moved to Georgia and brewed 3 batches last fall but other projects too precedent. I am about to start work on a bar room in my 1886 Victorian house and want to build a brewing room behind the bar.
  • A myriad of all grain ales and some lager when I have the infrastructure.
  • Nothing right now
  • NB Dry Irish Stout and a Scottish 60 Shilling
  • The shelf is bare!!!
  • No kegs yet
  • Male
  • Married
  • Newnan
  • Ga.

LATEST ACTIVITY

  • Posted in thread: Stainless Wiki Conical under $100? on 01-03-2011 at 09:42 PM
    So I am at home today working on my house and up pulls the UPS guy and drops off the bucket
    ring from Gemplers. Guess what the funnel and ring fit almost perfectly, (but not water tight)
    am thinking ...

  • Posted in thread: Stainless Wiki Conical under $100? on 01-03-2011 at 06:53 PM
    Bonwit,I dont know what the technical name of the fitting is but it is 3/4" thread with a
    shoulder on it that is close to one inch. I used a 7/8 inch bit to drill the hole. The piece
    that I used I got...

  • Posted in thread: Stainless Wiki Conical under $100? on 12-30-2010 at 04:44 PM
    The pipe tape was the pink .69 cent stuff at Lowe's. I am not sure if it was teflon or not. It
    took me 3-4 wraps to build up a bit of a gasket which you will probably find is enough to seal
    the deal. ...

  • Posted in thread: Stainless Wiki Conical under $100? on 12-27-2010 at 11:54 PM
    Hey guys,Sorry I haven't followed up on the project. I am remodeling my kitchen at this time
    and wont be able to play with it for a while. Feel free to post your projects on this thread,
    This isn't a ...

  • Posted in thread: Stainless Wiki Conical under $100? on 12-02-2010 at 01:23 AM
    Rivets can be tightened up easily with two hammers one larger one on the inside or a heavy
    piece of metal and smack the outside of the rivet and it will tighten up enough to seal most of
    the time. I h...

  • Posted in thread: Stainless Wiki Conical under $100? on 12-01-2010 at 11:32 PM
    Guys I am sorry that I havent updated this but I have been busy. I recieved the Ebay boil
    kettle it is the EXACT diameter as the funnel. I wrapped both the funnel and the pot with
    thread tape and lo...

  • Posted in thread: Stainless Wiki Conical under $100? on 10-29-2010 at 04:51 PM
    I'm thinking the corny keg would be interesting to play with but I really don't want to cut
    one. I think I'll find a funnel and kettle to work with.Bad part is a conical will not work in
    my setup. I u...

  • Posted in thread: Stainless Wiki Conical under $100? on 10-29-2010 at 04:24 PM
    You just had to post that and put another item on my list of projects!WayneWayne,Are you going
    to do the corny keg conical or the roller mill idea?either way I will let you know my concept.
    I can only...

  • Posted in thread: Stainless Wiki Conical under $100? on 10-28-2010 at 10:59 PM
    What kind of clamp are you using? Pics?I am using a clamp from Gemplers it is like $5 came 20
    hours after I ordered it and it does the trick but, I would like to have one with a bolt
    closure.Lg

  • Posted in thread: Stainless Wiki Conical under $100? on 10-28-2010 at 10:56 PM
    Scuba,Thats why I posted the purchase link for the funnel. I am hoping that a bunch of guys buy
    them and start experimenting. I personally wanted to build one out of a Sankey but I dont have
    one so I ...

0 COMMENTS
POST A COMMENT