Last Activity:12-07-2011 10:35 PM
1 Likes on 1 Posts
Posted in thread: N00B @ kegs on 11-02-2011 at 04:31 PM
it's still flat but all head. If beer is flat but you have a lot of foam, it means the CO2 is
going out of solution. This can happen if:* beer is over carbonated* your beer
lines/shangk/faucet are war...
Posted in thread: Why do some of my beers foam so wildly? on 10-26-2011 at 08:38 PM
Like unionrdr suggests by asking his questions, I see 3 different reasons that could explain
this:* you do not let the bottle rest in the fridge for enough time. As a consequence, CO2 is
not in soluti...
Posted in thread: set and forget carbing on 10-26-2011 at 05:56 PM
so one of your reasons that this is dumb and ineffective is because its not proven to be more
effective...? regardless of the fact that its definately no less effective?how long does it
really take yo...
Posted in thread: Is a hydrometer really accurate for cider? on 10-26-2011 at 05:02 PM
Yeah, everyone says that it takes a month for their cider to finish fermenting. I'm guessing
that the temperature is the difference. My friend, who owns the local home brew store said that
hers was st...
Posted in thread: What Size Auto-Siphon?? on 10-26-2011 at 04:35 PM
Good advice from someone who owns both. I think I have a 3/8 also. Bigger always sounds better,
but you make really good points. Another thing I would suggest is a siphon clip, it will clip
Posted in thread: Is a hydrometer really accurate for cider? on 10-26-2011 at 04:29 PM
What kind of beer do you drink ? :-)
Posted in thread: set and forget carbing on 10-26-2011 at 04:13 PM
i see no reason not to do it, so long as you make sure liquid cant backfeed into the
regulator.Here are some reasons:* No need to switch the connections.* It is possible to
drink/taste while it is ca...
Posted in thread: What Size Auto-Siphon?? on 10-26-2011 at 03:58 PM
I own both auto-siphons (1/2" and 3/8"). I started with the smaller one, and I got the bigger
one when I started brewing all grain to transfer cold wort from kettle to fermenter faster. It
works OK fo...
Posted in thread: How important is CO2 levels? on 10-26-2011 at 03:36 PM
To add to the previous reply:even though some beer styles are calling for higher CO2 levels,
chances are bottles you are using cannot handle so much pressure.I also carbonate everything at
the same st...
Posted in thread: Fixes for leaking wort chiller on 10-24-2011 at 03:44 PM
When it happened to my chiller, I removed the tubing from both ends of the chiller, cut off
half an inch from each tubing to remove the part damaged by the clamp. Then put it back with
the original sc...