VIEW MY

Cement102

Gift Premium Subscription To Cement102

Join Date:

12-12-2011

Last Activity:

02-14-2017 1:41 AM

LATEST ACTIVITY

  • Posted in thread: Nitrogen Tank on 02-14-2017 at 03:03 AM
    Thanks all. I appreciate the advice! I went ahead and ordered the tank. I think I am going to
    experiment a bit (the fun part) with using a CO2 and N2 mixing in tank. I think I am going to
    try to carb ...

  • Posted in thread: Nitrogen Tank on 02-11-2017 at 09:21 PM
    Looking for some feedback on a Nitro setup. I am trading between getting a Nitrogen/CO2 mix
    bottle, and getting pure nitrogen bottle and mixing using the CO2 tank I already have. (Carb to
    7psi CO2, th...

  • Posted in thread: RIMS Diameter on 05-02-2013 at 01:57 AM
    Hey all. Simple question. 1.5" or 2" diameter rims tube. Standard low watt density 1" element.
    Any recommendations on size, or just personal preference.

  • Posted in thread: Flex vs fixed on 03-18-2013 at 03:35 PM
    Hello all. I am in process of building up my sculpture. I am thinking of plumbing the entire
    fixture using stainless pipe. I don't plan on removing the pots. I notice pretty much everyone
    uses flex tu...

  • Posted in thread: Port location on 03-08-2013 at 07:21 PM
    All of the brew sculptures I have seen have the drain ports on the side. Any reason why people
    don't put their drains on the portion of the pots? Seems like a better spot. Has anyone tried
    to dimple t...

  • Posted in thread: Need help with stainless soldering on 01-25-2013 at 12:42 AM
    Mystery solved! After pulling out the angle grinder and grinding some of the rim... No sparks.
    Non ferrous. Aluminum!!! I guess the mirror finish fooled me. Auyways, I'm going to pick up a
    cheap ss pu...

  • Posted in thread: Need help with stainless soldering on 01-24-2013 at 02:40 PM
    Thanks for everyone's help. Here is a picture of my flux. Also, as an update I took one of my
    corny kegs last night and sanded fluxed and just set a small bead. Flux still burns fast, but
    the bead was...

  • Posted in thread: Need help with stainless soldering on 01-24-2013 at 04:21 AM
    Ok, so I tried again tonight wiht everyone's suggestion to no avail. Sticks to the coupler
    beautifully, but not he put. So I cleaned up a portion of the exterior with a dremmel wire bit,
    fluxed and ju...

  • Posted in thread: Need help with stainless soldering on 01-23-2013 at 06:49 PM
    I think I am burning the flux. Since I am using a half coupler I only have about 1/3 of an inch
    for the flame. Should input in a nipple or something to he's to get more distance. I am
    soldering on the...

  • Posted in thread: Need help with stainless soldering on 01-23-2013 at 05:07 AM
    Photos

0 COMMENTS
POST A COMMENT