Last Activity:05-10-2013 7:42 AM
Posted in thread: PID Tuning - HELP! on 09-02-2010 at 06:11 AM
Reverse mode is the one you want to let the PID do the work. When doing autotune it's best to
be at the temp you normally want before running it so let the system run for a while and then
hit the auto...
Posted in thread: Auber PID + RTD pt100 sensor issues. on 08-31-2010 at 05:17 AM
I had an error with one of the RTD probes (4") which was a result of two wires breaking the
solder and no longer connecting to the probe. Issue was found when I took the back connector
off and saw the...
Posted in thread: horizontal mounting of water filter on 06-02-2010 at 06:58 AM
I wouldn't think the functionality of the unit would be affected by horizontal or vertical
mounting. Whether the thread and seal for the cartridge is ok in the horizontal due to the
weight of wetted c...
Posted in thread: Brew Stand Design on 06-02-2010 at 06:18 AM
I'd do away with the middle length and add some short lengths between the back and front
supports effectively making a square frame as a base for each keg. The central vertical support
back and front ...
Posted in thread: Browntown Brew Rig on 06-02-2010 at 03:48 AM
A little update - the 2nd package from Auberins arrived last night. Opened it up to find the
PID, heat sink and the 2 PT100 temp probes. Didn't realise how thick the probes are. be
looking around for...
Posted in thread: Browntown Brew Rig on 05-28-2010 at 01:20 AM
Recieved the first package from auberins yesterday. PID, 2xSSRs and a heatsink. Man the
heatsink is huge. Very impressed with the turn around on the goods - ordered it on Thursday
last week and made i...
Posted in thread: Browntown Brew Rig on 05-27-2010 at 01:40 AM
Hi folks,Following a number of great threads I thought I might as well put my ideas and plans
on here for comment/criticism/wonderful praise.Excuse the metric but being Aussie I have little
grasp on i...
Posted in thread: Brewery Build - Single Tier HERMS on 05-25-2010 at 08:19 AM
That looks great. Am currently in the process of designing a single tier HERMS setup. Electric
HLT controlled by Auberins PID, separate HERMS pot with element and Auberins PID with ramp
Posted in thread: Brewery names--what's your story? on 05-13-2010 at 12:16 AM
Browntown Brewery - like brownsbrews my surname is Brown. Not really sure about the origin, was
probably drunk, but it rhymes and fits so it stuck. Just trying to come up with a nice logo and
Posted in thread: Alco Ginger Beer on 11-05-2009 at 04:36 AM
To get some additional heat don't be afraid to add a chopped up birds eye chilli (including
seeds) added to the fermenter.
On tap - Eurona 6.4%, Ordinary Bitter 4.1%
In the keezer - Ginga Minga 5.7%, Dat's Foightin' Coider 4.7%, Tripel the Fun 8.3%
Bottles - Toucan Sam
Brewery - Single tier 3v Herms rig being designed, bar being designed
- Wroxbrew's 20 gallon stout tank build
- What are you drinking now?
- It's official starting my own brewing business!
- IPA hops and specialty grains question
- Additional Fermentation Steps
- Some questions about boiling the wort...
- Anaheim Pepper Peach Wheat
- Making Traditional Sake! The difference between it and Rice wine.
- Funny things you've overheard about beer
- 21%+ Barleywine
- Well THAT was a total disaster...