cbjr1960

Gift Premium Subscription To cbjr1960

Join Date:

04-24-2011

Last Activity:

06-30-2014 11:58 AM

1 Likes on 1 Posts 

    ABOUT ME

  • English Pale Ale (Extract)
  • Belgian Wit
  • Male
  • Married
  • Boyertown
  • PA

LATEST ACTIVITY

  • Posted in thread: The "U-Brew Mark One" on 09-21-2011 at 12:35 AM
    Thanks, The brewery is going in the room next to my bar so I will have a place to wash glasses.

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 08:38 PM
    and there you have it!

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 08:36 PM
    The fittings for the sink are from tractor supply. I am ordering a livewell screen from
    cabella's for the lower one to keep ice from clogging it.

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 08:31 PM
    more pics 3

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 08:27 PM
    not as hard as it looks, I installed the relay board in a separate box with all the 110 to
    limit the wiring going up to the box. I also installed an acrylic cover so that I could see the
    relay lights ...

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 08:25 PM
    The red LED's between the PID displays are wired directly to the SSRs so that they come on
    every time the burner gets energized so that I know how often they are cycling. I also
    installed a green LED ...

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 07:34 PM
    No you are not! only three the other is a wayne utility pump for the chiller, I wouldn't use a
    march for chiller water

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 04:17 PM
    I haven't brewed on it yet as I have to run a 220 line from the box in my cave to the brew
    kitchen in the next room, The sink does double duty as I have the cooling lines plumbed right
    into the side w...

  • Posted in thread: The "U-Brew Mark One" on 09-19-2011 at 03:45 PM
    Here it is finally finished, build pics will follow shortly tho I must admit I was a little
    lazy documenting the build. It is powered by a Brewtroller 4 Pro board, and I used Blackheart's
    control pane...

  • Posted in thread: New Electric HERMS build on 07-29-2011 at 01:57 AM
    I got my brewtroller today and went down to the electric supply store to get case Stuff. here's
    what I came up with. I started with an 8" x 8" x 4" pvc water tight panel box and things went
    from there...

Following Stats
0 COMMENTS
POST A COMMENT