VIEW MY

carkom

Gift Premium Subscription To carkom

Join Date:

12-09-2010

Last Activity:

12-17-2014 11:54 AM

5 Likes on 5 Posts 

    ABOUT ME

  • Single
  • Bend
  • Oregon

LATEST ACTIVITY

  • Posted in thread: Grain Mill motor torque Question/help on 04-20-2014 at 08:13 PM
    Run it full speed. Put a big pulley to the mill and a small one on the motor. Use it's best
    torque output and gear it down to the rpm you want. Gearing it down will give you even more
    torque at the mi...

  • Posted in thread: Grain Mill motor torque Question/help on 04-18-2014 at 09:50 PM
    At that low of RPMs the torque isn't enough to grind the grain.

  • Posted in thread: Grain Mill motor torque Question/help on 04-18-2014 at 08:56 PM
    I need some help figuring out my grain mill motor ratios. I have a treadmill motor. It doesn't
    say what the HP is for the motor on the sticker. Any way to find this out? Do I need this info
    to find ou...

  • Posted in thread: Wife needs advice please! on 11-07-2013 at 05:20 PM
    Your beer lines look to be about 4-5 feet. If you want a quick and easy fix to foaming then get
    lines that are double that length. Great job and good luck! Beautiful and handy - what a combo!
    Lucky gu...

  • Posted in thread: Cake pan + skateboard wheel + bike brakes = homemade peristaltic pump?? on 10-28-2013 at 03:52 PM
    I have a stupid question maybe someone could clear up for me. I'm confused about the metal disc
    that connects the mountain bike disc brakes to the axle screw. I don't think it's mentioned in
    the parts...

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-22-2013 at 03:49 PM
    First brew day using the stick was a success. Helped boil my wort in half the time. Thanks for
    the advice on air tight spaces and the silica is a great idea! I'll look into it.

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-18-2013 at 03:44 PM
    Got it leak tested, wired, and tested working. I'll use it in my brew day tomorrow for a full
    brew test but it seems great! Here's some final pics.I drilled a hole in the top elbow for the
    ground plug...

  • Posted in thread: Cake pan + skateboard wheel + bike brakes = homemade peristaltic pump?? on 10-13-2013 at 04:19 PM
    Spring form pan started bending and flexing causing the tube to not get fully closed. I used
    70mm wheels, got em for $23 for 4 on ebay. I found some old ford truck drums (9 inches) for $9
    for 2 (4.50 ...

  • Posted in thread: All stainless (weld free & JB weld free) heatstick design on the cheap on 10-11-2013 at 12:02 AM
    So Coop sent me a tap he had at his shop so I could give the re-tapping a shot. Worked great!
    Took about 20 mins of back and forth turning, plenty of anti-seize paste and a good amount of
    muscle for t...

  • Posted in thread: Ebrewery panel mounting on 10-10-2013 at 03:58 PM
    Yeah I cut and JB welded them both.

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS