VIEW MY

captain_vood

Gift Premium Subscription To captain_vood

Join Date:

12-31-2009

Last Activity:

10-10-2012 10:56 AM

    ABOUT ME

  • North Texas
  • Single

LATEST ACTIVITY

  • Posted in thread: Sight Glass with Thermometer back in stock on 03-24-2010 at 10:57 PM
    Hey guys, just to be perfectly clear, and for future generations, this combo kit comes with two
    metal washers, and one silicone washer, should a metal washer go inside and outside, and the
    silicone on...

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 06:01 PM
    Thanks Fletch and Ohio-Ed, its working beautifully now! After counting the Turbodog bottles in
    the sink, its a wonder I got it working.Anyway, black to both sides of the NO switch, one
    jumper from pum...

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 03:05 AM
    Doh! Sorry. Thanks for chiming in Ed, I think you have given me a moment of clarity.I took the
    "block attached" to mean the black one built on to the switch, rather than "attached" to the
    back like yo...

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 02:23 AM
    That is one of the configurations I already tried. I did it again though to make sure.Here are
    pics: unpushed, light is on, pump is off.Then when I push the button, pump goes on, light goes
    off.Inste...

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 02:02 AM
    Here is three more pictures with the brown NO switch attached to the black part:

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 01:57 AM
    A picture is worth 1000 words, so I took some pictures so you can see what I am talking about.
    You can click on them to see hi-res images.

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 01:54 AM
    The ones on the black part are not labeled with electrical notations, the only say 1 and 2 on
    one side and 3 and 4 on the other, to indicate where to attach the optional additional contact
    blocks if y...

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 01:50 AM
    Do you have on ohmmeter? Read across the terminals on the black part. No meter? Are the
    terminals on the black part labeled?Ohmmeter shows nothing across terminals ont he black part.
    The terminals are...

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 01:46 AM
    As long as you don't connect any white or green wires to the terminals, nothing bad can happen.
    :) Connect plug and pump blacks to tne C and NO terminals on the brown block, with jumpers to
    same termi...

  • Posted in thread: Quick push button wiring question on 03-20-2010 at 01:40 AM
    The Block attached to the back of the switch is the NO contact.Attach the black wire from your
    extension cord to one of the connectors and the black wire from your pump to the other
    connector.Your pum...

0 COMMENTS
POST A COMMENT