VIEW MY

Cantaloupe

Gift Premium Subscription To Cantaloupe

Join Date:

06-25-2010

Last Activity:

07-11-2013 5:45 PM

    ABOUT ME

  • California
  • Farmer
  • IPA, American Red Ale
  • Male
  • Married

LATEST ACTIVITY

  • Posted in thread: automated burner parts on 08-29-2011 at 11:29 PM
    PLOVE - I haven't done a ton of shopping around. I got the valve and parts from pexsupply.
    Everything seems pretty close when you shop. The control panel parts I was able to get mostly
    from old panels...

  • Posted in thread: automated burner parts on 08-27-2011 at 04:53 AM
    Is it possibly easier to plumb if use this burner from morebeer? looks like this just has a
    1/2 in female pipe thread for the inlet and multiple jets on top? That way I can keep
    everything rigid fro...

  • Posted in thread: automated burner parts on 08-27-2011 at 04:30 AM
    Thanks that helps with the next round of shopping. Is it best to put a manual gas valve before
    or after the electric gas valve for flame adjustment?? Will all of this work with a 10 in low
    pressure hu...

  • Posted in thread: automated burner parts on 08-25-2011 at 10:19 PM
    Well I finally got around to ordering some of the parts for my brutus build with a HERMS
    system. I am using Honeywell VR8200, Q314 pilot burner, Thermocouple and 75 VA transformer for
    the gas control ...

  • Posted in thread: Automated burner help on 06-28-2011 at 12:13 AM
    Thanks for the responses guys. This is a great place to start. I was wondering what the
    thermocouple was used for with a standing pilot. Is it mounted with the pilot to sense when it
    is not lit and sh...

  • Posted in thread: Automated burner help on 06-27-2011 at 04:34 PM
    It seems like there are a lot of opinions about this out there but I want to start collecting
    parts for my Brutus build. In my last thread the responders prompted me to use a basic temp
    controller and...

  • Posted in thread: automated brew system help on 06-22-2011 at 06:09 AM
    For the burner setup I see that some people hard plumb the burners in a set position a la the
    brutus system. Whereas others allow for adjustable height of the burners below the tanks, is
    either of the...

  • Posted in thread: automated brew system help on 06-22-2011 at 05:12 AM
    Sorry that should read transformer.

  • Posted in thread: automated brew system help on 06-22-2011 at 05:12 AM
    Ok the love controllers sound good if they work just fine. I'm not opposed to a standing pilot
    either if it's simpler to do. A parts list would be great for the gas controls as it will save
    a lot of s...

  • Posted in thread: automated brew system help on 06-21-2011 at 09:26 PM
    Dude that a nice looking panel.JonW thanks for the offer. I live in the central valley so I am
    a ways away. I think I may give this a try and see I can get it to work. Reading all of these
    posts reall...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS