Last Activity:09-28-2014 1:26 AM
Likes Given: 1
Posted in thread: Cloudy beer after kegging on 04-26-2014 at 12:41 AM
Did you use Irish moss or whirlflock? My lighter beers always pour a bit cloudy for the first
week or so. Sent from my iPad using Home Brew
Posted in thread: Keggerator/keezer/ferm chamber opinions on 04-26-2014 at 12:38 AM
I feel like any fridge should be able to get to the low 30s temp wise which is probably cold
enough unless you like beer slurpees. Have you tried letting your ales warm a bit before
drinking them? I'v...
Posted in thread: First time yeast starter, Does it look ok? on 03-02-2014 at 02:47 PM
Thanks for the responses. Next starter will be larger. Is there any damage done with this size
starter already pitched? Also the OG ended up being 1.101.RafalSo you intended 1.046 OG and you
Posted in thread: Hop shortage! on 03-01-2014 at 04:37 PM
Like anything, there could be short term swings..... or swings in particular types of hops. Hop
shortage= high price. High price= more hops grown. More hops grown = low price. Low price =
less hops gr...
Posted in thread: Over carbonated on 03-01-2014 at 04:36 PM
It shot out when you opened a bottle right?Bad news is that it won't lose carbonation in the
bottles so you'll have to gently crack all the lids then recap if you want to bring the carb
Posted in thread: Invest in Stainless Hop Spider or Whirlpool ? on 02-28-2014 at 03:05 AM
By the time I get another valve, weldless bulkheads, compression fittings and tubes I come out
to almost he same price as the Hop SpiderAlso I'm chilling through a plate chiller.You can
build that set...
Posted in thread: Bad feeling on 02-23-2014 at 04:05 PM
Did you skim that scum off the top before kegging? Seems to me it's like cutting the moldy part
off of an otherwise perfectly good piece if bread.
Posted in thread: RIMS PID help on 02-22-2014 at 05:32 PM
I have auto-tuned since installing the new element, but that raises another interesting
question: how often do most people auto-tune their PIDs? Every time you change the flow rate?
Does it matter if ...
Posted in thread: RIMS PID help on 02-22-2014 at 07:43 AM
How was the pump flow when you ran auto tune? You should run auto tune with a similar flow rate
so it's able to learn accurately.I turned down the pump to the flow I wanted to recirc at
Posted in thread: RIMS PID help on 02-21-2014 at 06:31 PM
I've got a single PID (budget Chinese type, MyPin TA4) powering a ULWD 5500W element running on
120v in my RIMS tube. I recently replaced the HWD 1500W element I used to run in the RIMS tube
with the ...