Last Activity:10-25-2014 11:07 AM
Posted in thread: Lake Walk Pale Ale on 02-07-2012 at 01:26 AM
Dude - Thanks for the recipe. By far my favorite of everything I've made so far. I'm amazed at
how quickly the hop flavor changes. It seems that every few days I can detect a slightly
differnt hop cha...
Posted in thread: Pump and filtering break material on 10-16-2011 at 09:59 PM
You wont have any trouble with the cold break. I occasionally have trouble with the late
addition hops but i've found that if I choke off the stream to about halfway or less then I can
avoid pulling i...
Posted in thread: One solution found for overshooting with Auber2352 on 10-09-2011 at 04:09 AM
+1. Moving my RTD to a tee on the output helped tremendously.I thought the very same thing so
ordered a T and another RTD for measurement there but I still had the same problem. It may be
that the pic...
Posted in thread: One solution found for overshooting with Auber2352 on 10-08-2011 at 04:15 PM
GNBrews Cad - How is the Auber changing the output of the element to 30%? Doesn't the output of
the Auber just turn the element on/off full power? Do you have a PWM circuit rigged to the SSR?
Posted in thread: One solution found for overshooting with Auber2352 on 10-08-2011 at 04:52 AM
No I didn't. Would that be to lower the amperage going to the element?Ultimately I think
running 110 to the element to control the mash will be the way to go then switch to 220 for the
boil. I believe...
Posted in thread: One solution found for overshooting with Auber2352 on 10-08-2011 at 02:43 AM
I had been having problems with my e-kettle always overshooting the set temperature by 2 to 4
deg. The problem I figured was that the time it took to register the heat at the temp probe,
there was so ...